Person: SARIOĞLU, CEVAT
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
SARIOĞLU
First Name
CEVAT
Name
3 results
Search Results
Now showing 1 - 3 of 3
Publication Metadata only The effect of plasma detonation parameters on residual stresses developed in the plasma modified layer(PERGAMON-ELSEVIER SCIENCE LTD, 2014) SARIOĞLU, CEVAT; Ozbek, Yildiz Yarali; Sarioglu, Cevat; Durman, MehmetThe surface modification of the AISI 4140 steel by pulse plasma detonation process resulted in residual stresses. The residual stresses in modified surfaces measured using XRD tilting technique were determined for different process parameters. The results indicated that residual stress developed in modified surface increased from -200 MPa to -1000 MPa with decreasing in nozzle distance and increased from -554 MPa to -823 MPa with increasing in battery capacity. In shortest nozzle distance (60 mm), the increasing in number of pulse from 5 to 10 resulted in decreasing residual stress from -1000 MPa to -340 MPa. It was clearly demonstrated at first time that pulse plasma detonation process parameters significantly influenced the value of residual stress. (C) 2014 Elsevier Ltd. All rights reserved.Publication Metadata only The effect of anisotropy on residual stress values and modification of Serruys approach to residual stress calculations for coatings such as TiN, ZrN and HfN(ELSEVIER SCIENCE SA, 2006) SARIOĞLU, CEVAT; Sarioglu, CevatThe residual stresses in literature on hard coatings (e.g., TiN, CrN, HfN and ZrN) are usually calculated using the mechanical elastic constants often determined by indentation technique by assuming isotropic behavior. The effect of anisotropy of the hard coatings on residual stress values such as TiN, ZrN and HfN has been documented using classical technique and Thin Film techniques (fixed incidence multiplane (FIM) Technique). Due to lack of the single crystal data, the anisotropy of coatings has been taken into account through XECs determined experimentally for ZrN, HfN and TiN films. Recently, single crystal elastic constants of the ZrN, HfN and NbN have been measured. In the light of single crystal elastic constant data, residual stresses reported in the literature were reevaluated according to Reuss, Voigt, Hill (or mixed) and Kroner models using the best fitting approach after modifying Serruys approach. The modified Serruys approach captures the anisotropic behavior of coatings such as ZrN and Zr(Hf)N. The residual stress calculations were improved and the residual stress values were significantly increased as high as 30% compared to the previously published data. The best fitting approach (modified Serruys approach) was compared to the procedure used by Perry using experimentally determined XECs. (c) 2006 Elsevier B.V. All rights reserved.Publication Metadata only Measurement of residual stresses by X-ray diffraction techniques in MoN and Mo2N coatings deposited by arc PVD on high-speed steel substrate(ELSEVIER SCIENCE SA, 2005) SARIOĞLU, CEVAT; Sarioglu, C; Demirler, U; Kazmanli, MK; Urgen, MPolycrystalline MoN and Mo2N films have promising physical and mechanical properties, which made them candidates for wear- and corrosion-resistant coatings and diffusion barriers in microelectronics. The residual stresses in MoN and Mo2N films consist of thermal and growth stresses or intrinsic stress generated during deposition. Residual stresses in the MoN and Mo2N coatings deposited by arc PVD techniques on HSS substrate were measured by XRD using the Rocking and the Fixed Incidence Multiplane (FIM) techniques. Residual stresses measured by both techniques in Mo2N (face center cubic, f.c.c.) and in MoN (hexagonal) films were about 5 and 10 GPa (compressive), respectively. These results indicated that residual stresses in the MoN film was two times greater than the residual stresses in the Mo2N film. (C) 2004 Elsevier B.V. All rights reserved.