Person: EKREN, NAZMİ
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
EKREN
First Name
NAZMİ
Name
7 results
Search Results
Now showing 1 - 7 of 7
Publication Metadata only Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application(SPRINGER, 2020) BİLĞİÇ ALKAYA, DİLEK; Cesur, Sumeyye; Oktar, Faik Nuzhet; Ekren, Nazmi; Kilic, Osman; Alkaya, Dilek Bilgic; Seyhan, Serap Ayaz; Ege, Zeynep Ruya; Lin, Chi-Chang; Erdem, Serap; Erdemir, Gokce; Gunduz, OguzhanBone tissue engineering has begun to draw attention in recent years. The interactive combination of biomaterials and cells is part of bone tissue engineering. Sodium alginate (SA) is a biologically compatible, degradable, non-toxic natural polymer accepted by the human body and is widely used in the field of tissue engineering. Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. Hydroxyapatite (HA) and tricalcium phosphate (TCP) derived from natural sources such as marine species and bovine bone are biocompatible and non-toxic biomaterials which are used to reconstruct many parts of the skeleton. In this study, PLA, SA with different compositions, and nanofibers obtained by adding orange spiny oyster shell powders (Spondylus barbatus) to them by using electrospining technique. Cell culture study, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and physical analysis such as density, electrical conductivity, surface tension, viscosity measurement, and tensile strength measurement tests were carried out after the production process. Produced nanofibers showed smooth and beadless surface. The average diameters and distributions decreased with the addition of optimum PLA and TCP amount. The tensile strength of nanofibers was enhanced with the additional SA and TCP. The produced nanofibers are compatible with human bone tissue, which are not cytotoxic, and in addition, a high cell efficiency of SaOS-2 cells on the nanofibers was observed with SEM images.Publication Open Access A drug-eluting nanofibrous hyaluronic acid-keratin mat for diabetic wound dressing(2022-01-01) EKREN, NAZMİ; GÜNDÜZ, OĞUZHAN; Su S., Bedir T., KALKANDELEN C., Sasmazel H. T. , Basar A. O. , Chen J., EKREN N., GÜNDÜZ O.© 2022, Qatar University and Springer Nature Switzerland AG.Diabetes mellitus is a chronic metabolic disease associated with long-term multisystem complications, among which are non-healing diabetic foot ulcers (DFUs). Electrospinning is a sophisticated technique for the preparation of polymeric nanofibers impregnated with drugs for wound healing, burns, and diabetic ulcers. This study describes the fabrication and characterization of a novel drug-eluting dressing made of core–shell structured hyaluronic acid (HA)–keratin (KR)-polyethylene oxide (PEO) and polycaprolactone (PCL) nanofibers to treat diabetic wounds. The core–shell nanofibers produced by the emulsion electrospinning technique provide loading of metformin hydrochloride (MH), HA, and KR in the core of nanofibers, which in return improves the sustained long term release of the drug and prolongs the bioactivity. Morphological and chemical properties of the fibers were examined by SEM, FTIR, and XRD studies. It was observed that the fibers which contain HA and KR showed thin fiber structure, greater swelling capacity, fast degradation and increased cumulative drug release amount than neat emulsion fibers due to the hydrophilic nature of HA and KR. MH showed a sustained release from all fiber samples over 20 days and followed the first-order and Higuchi model kinetics and Fickian diffusion mechanism according to kinetic analysis results. In vitro cell culture studies showed that the developed mats exhibited enhanced biocompatibility performance with HA and KR incorporation. The results show that HA and KR-based emulsion electrospun fiber mats are potentially useful new nanofiber-based biomaterials in their use as drug carriers to treat diabetic wounds.Publication Metadata only Cell studies on Electrohydrodynamic (EHD)-3D-bioprinted Bacterial Cellulose\Polycaprolactone scaffolds for tissue engineering(ELSEVIER SCIENCE BV, 2019) EKREN, NAZMİ; Altun, Esra; Ekren, Nazmi; Kuruca, Serap Erdem; Gunduz, OguzhanThe application of three-dimensional (3D) printed scaffolds for tissue engineering have gained significant attention in recent years. The biological activity of scaffolds used in tissue engineering applications depends on fabricating high-resolution patterns with fiber orientation and scale. In this study, Bacterial Cellulose (BC) and Polycaprolactone (PCL) composite scaffolds with the line spacing of 100 mu m are produced using Electrohydrodynamic (EHD)-3D-bioprinting technique. The composite scaffolds exhibit enhanced biocompatibility with facilitated cell attachment and proliferation in vitro. The results of this work have demonstrated that EHD-3D-bioprinting method shows great potential for the preparation of BC/PCL composite scaffold and patterns for tissue engineering with enhanced bioactivity. (C) 2018 Published by Elsevier B.V.Publication Metadata only Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen scaffolds for hard tissue engineering(SPRINGER, 2019) İNAN, AHMET TALAT; Aydogdu, Mehmet O.; Mutlu, Bilcen; Kurt, Mustafa; Inan, Ahmet T.; Kuruca, Serap E.; Erdemir, Goekce; Sahin, Yesim M.; Ekren, Nazmi; Oktar, Faik N.; Gunduz, Oguzhan3D bioprinting provides an innovative strategy to fabricate a new composite scaffold material consisted in a porous and rough structure with using polycaprolactone (PCL), beta-tricalcium phosphate (beta-TCP), and collagen as a building block for tissue engineering. We investigated the optimization of the scaffold properties based on the beta-TCP concentration using 3D bioprinting method. Computer-aided drawing was applied in order to digitally design the scaffolds while instead of solid filaments, materials were prepared as a blend solution and controlled evaporation of the solvent during the bioprinting was enabled the proper solidification of the scaffolds, and they were successfully produced with well-defined porous structure. This work demonstrated the feasibility of complex PCL/beta-TCP/collagen scaffolds as an alternative in the 3D bioprinting engineering to the fabrication of porous scaffolds for tissue engineering.Publication Metadata only Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application(Springer, 2020) ŞAHİN, ALİ; Ilhan E., Ulag S., Sahin A., Ekren N., Kilic O., Oktar F.N., Gunduz O.In recent years, scaffolds produced in 3D printing technology have become more widespread tool due to providing more advantages than traditional methods in tissue engineering applications. In this research, it was aimed to produce patches for the treatment of tympanic membrane perforations which caused significant hearing loss by using 3D printing method. Polylactic acid (PLA) scaffolds with Chitosan (CS) added in various ratios were prepared for artificial eardrum patches. Different amounts of CS added to PLA to obtain more biocompatible scaffolds. The created patches were designed by mimicking the thickness of the natural tympanic membrane thanks to the precision provided by the 3D printed method. The produced scaffolds were analyzed separately for physical, chemical, morphological, mechanical and biocompatibility properties. Human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) were used for cell culture study to analyze the biocompatibility properties. 15 wt% PLA was chosen as the control group. Scaffold containing 3 wt% CS demonstrated significantly superior and favorable features in printing quality. The study continued with these two scaffolds (15PLA and 15PLA/3CS). This study showed that PLA and PLA/CS 3D printed scaffolds are a potential application for repairing tympanic membrane perforation. © Springer Nature Switzerland AG 2020.Publication Metadata only 3D printing of chitosan/ poly(vinyl alcohol) hydrogel containing synthesized hydroxyapatite scaffolds for hard-tissue engineering(ELSEVIER SCI LTD, 2019) KARTAL, İLYAS; Ergul, Necdet Mekki; Unal, Semra; Kartal, Ilyas; Kalkandelen, Cevriye; Ekren, Nazmi; Kilic, Osman; Chi-Chang, Lin; Gunduz, OguzhanIn recent years, 3D printed scaffolds becoming a widespread tool, which supports the repair mechanism of natural tissues. In order to support this knowledge, we used 3D printing methods to fabricated Chitosan (CH)/poly(vinyl alcohol)(PVA)-based scaffolds contains with a various ratio of hydroxyapatite (HA) (2.5, 5, 10, and 15 wt%). These composited scaffolds were further characterized for their chemical, morphological, mechanical, and biocompatibility properties. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), swelling test, and compressive strength test were performed to reveal structural, mechanical and chemical characteristics of scaffolds. Among others, 15 wt% HA contained group demonstrated significantly superior and beneficial features in printing quality. Also, the results reveal that scaffolds have similar elastic modulus to natural bone. Bone morphogenetic protein-2 (BMP-2) protein was added to the most successful mechanically produced sample. As a result, it was shown that Chitosan/PVA/HA (15 wt%) with BMP-2 tissue scaffold could form a three-dimensional natural extracellular scaffold suitable for human mesenchymal stem cells. Altogether, these results show that hydroxyapatite added scaffolds produced may be a promising approach for bone tissue engineering applications.Publication Metadata only Production of the novel fibrous structure of poly(epsilon-caprolactone)/tri-calcium phosphate/hexagonal boron nitride composites for bone tissue engineering(AUSTRALIAN CERAMIC SOCIETY, 2018) OKTAR, FAİK NÜZHET; Ozbek, Burak; Erdogan, Barkin; Ekren, Nazmi; Oktar, Faik Nuzhet; Akyol, Sibel; Ben-Nissan, Besim; Sasmazel, Hilal Turkoglu; Kalkandelen, Cevriye; Mergen, Ayhan; Kuruca, Serap Erdem; Ozen, Gunes; Gunduz, OguzhanNanofibrous composites of the poly(epsilon-caprolactone) (PCL), tricalcium phosphate (TCP), and hexagonal boron nitride (h-BN) with different compositions were manufactured by using an economical and non-complicated method called electrospinning. Produced fibrous structures showed no bead formation and had a clean surface. Characterization of the composites showed that particles were successfully mixed with polymer phase. High cell activity of SaOS-2 cells on the composites was observed with SEM images. In addition, fibrous scaffolds are biocompatible with human bone tissue and are highly degradable.