Person: AKSU, MEHMET BURAK
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
AKSU
First Name
MEHMET BURAK
Name
5 results
Search Results
Now showing 1 - 5 of 5
Publication Metadata only Development of Satureja cuneifolia-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material(ELSEVIER, 2020) OKTAR, FAİK NÜZHET; Ilhan, Elif; Cesur, Sumeyye; Guler, Ece; Topal, Fadime; Albayrak, Deniz; Guncu, Mehmet Mucahit; Cam, Muhammet Emin; Taskin, Turgut; Sasmazel, Hilal Turkoglu; Aksu, Burak; Oktar, Faik Nuzhet; Gunduz, OguzhanAcute wounds are a common health problem, with millions of people affected and decreased granulation tissue formation and vascularization, it is also a big challenge for wound care researchers to promote acute wound healing around the globe. This study aims to produce and characterize Satureja cuneifolia plant extract (SC) blended with sodium alginate (SA) /polyethylene glycol (PEG) scaffolds for the potential treatment of diabetic ulcer. SA/PEG scaffolds were prepared by adding different concentrations (1, 3, and 5 wt%) of PEG to 9 wt% SA. The morphological and chemical composition of the resulting 3D printed composite scaffolds was determined using scanning electron microscopy (SEM) and Fourier transforms infrared spectroscopy (FTIR), respectively. Mechanical and thermal properties, swelling, and degradation behaviours were also investigated. The release kinetics of SC were performed. The antimicrobial analysis was evaluated against Escherichia coli and Staphylococcus aureus strains. 3D printed scaffolds have shown an excellent antibacterial effect, especially against gram-positive bacteria due to the antibacterial SC extract they contain. Furthermore, the cell viability of fibroblast (L929) cells on/within scaffolds were determined by the colourimetric MTT assay. The SA/PEG/SC scaffolds show a great promising potential candidate for diabetic wound healing and against bacterial infections. (c) 2020 Elsevier B.V. All rights reserved.Publication Open Access A novel approach for the fabrication of 3D-printed dental membrane scaffolds including antimicrobial pomegranate extract.(2023-02-22) AKSU, MEHMET BURAK; Karabulut H., Ulag S., Dalbayrak B., Arisan E. D., Taskin T., Guncu M. M., Aksu B., Valanezhad A., Gunduz O.In this study, a dental membrane scaffold was fabricated using a 3D printing technique, and the antimicrobial effect of pomegranate seed and peel extract were investigated. For the production of the dental membrane scaffold, a combination of polyvinyl alcohol, starch, and pomegranate seed and peel extracts was used. The aim of the scaffold was to cover the damaged area and aid in the healing process. This can be achieved due to the high antimicrobial and antioxidant content of pomegranate seed and peel extracts (PPE: PSE). Moreover, the addition of starch and PPE: PSE improved the biocompatibility of the scaffold, and their biocompatibility was tested using human gingival fibroblast (HGF) cells. The addition of PPE: PSE into the scaffolds resulted in a significant antimicrobial effect on S. aureus and E. faecalis bacteria. Moreover, different concentrations of starch (1%, 2%, 3% w/v) and pomegranate peel and seed extract (3%, 5%, 7%, 9%, and 11% PE v/v) were analyzed to obtain the ideal dental membrane structure. The optimum starch concentration was chosen as 2% w/v due to it giving the scaffold the highest mechanical tensile strength (23.8607 ± 4.0796 MPa). The pore sizes of each scaffold were studied by SEM analysis, and pore sizes were arranged between 155.86 and 280.96 µm without any plugging problems. Pomegranate seed and peel extracts were obtained by applying the standard extraction method. High-performance liquid chromatography was performed using the diode-array detection (HPLC-DAD) technique to analyze the phenolic content of the pomegranate seed and peel extracts. Two phenolic components of the pomegranate seed and peel extracts were investigated in the following amounts: fumaric acid (17.56 µg analyte/mg extract) and quinic acid (18.79 µg analyte/mg extract) in pomegranate seed extract and fumaric acid (26.95 µg analyte/mg extract) and quinic acid (33.79 µg analyte/mg extract) in pomegranate peel extract.Publication Open Access Fabrication of gentamicin sulfate-loaded 3d-printed polyvinyl alcohol/sodium alginate/gelatin-methacryloyl hybrid scaffolds for skin tissue replacement(2023-01-01) ULAĞ, SONGÜL; ŞAHİN, ALİ; AKSU, MEHMET BURAK; GÜNDÜZ, OĞUZHAN; Izgordu M. S., Ayran M., ULAĞ S., Yildirim R., Bulut B., ŞAHİN A., Guncu M. M., AKSU M. B., GÜNDÜZ O.3D-printed scaffolds can better mimic the function of human skin, both biologically and mechanically. Within the scope of this study, the effect of the addition of different amounts (10, 15, 20 mg) of gentamicin sulfate (GS) to a 10 mL solution of natural and synthetic polymers is investigated. Sodium alginate (SA), gelatin-methacryloyl (GelMA), and polyvinyl alcohol (PVA) are chosen as bioactive materials. The surface morphology and pore structures are visualized by scanning electron microscopy (SEM). According to the results, it is observed that the pore sizes of all scaffolds are smaller than 270 µm, the lowest value (130 µm) is obtained in the scaffold loaded with 15 mg GS, and it also has the highest tensile strength value (12.5 ± 7.6 MPa). Similarly, it is observed that the tensile strength (9.7 ± 4.5 MPa) is high in scaffold loaded with 20 mg GS. The biocompatibility test is performed with fibroblast cells, and the results show that the scaffolds are biocompatible with cells. The antibacterial test is carried out against the S.aureous and E. coli and the results indicate that all GS-loaded scaffolds demonstrate antibacterial activity.Publication Open Access 3D Propolis-Sodium Alginate Scaffolds: Influence on Structural Parameters, Release Mechanisms, Cell Cytotoxicity and Antibacterial Activity(MDPI, 2020-11-02) AKSU, MEHMET BURAK; Aranci, Kubra; Uzun, Muhammet; Su, Sena; Cesur, Sumeyye; Ulag, Songul; Amin, Al; Guncu, Mehmet Mucahit; Aksu, Burak; Kolayli, Sevgi; Ustundag, Cem Bulent; Silva, Jorge Carvalho; Ficai, Denisa; Ficai, Anton; Gunduz, OguzhanIn this study, the main aim was to fabricate propolis (Ps)-containing wound dressing patches using 3D printing technology. Different combinations and structures of propolis (Ps)-incorporated sodium alginate (SA) scaffolds were developed. The morphological studies showed that the porosity of developed scaffolds was optimized when 20% (v/v) of Ps was added to the solution. The pore sizes decreased by increasing Ps concentration up to a certain level due to its adhesive properties. The mechanical, swelling-degradation (weight loss) behaviors, and Ps release kinetics were highlighted for the scaffold stability. An antimicrobial assay was employed to test and screen antimicrobial behavior of Ps against Escherichia coli and Staphylococcus aureus strains. The results show that the Ps-added scaffolds have an excellent antibacterial activity because of Ps compounds. An in vitro cytotoxicity test was also applied on the scaffold by using the extract method on the human dermal fibroblasts (HFFF2) cell line. The 3D-printed SA-Ps scaffolds are very useful structures for wound dressing applications.Publication Metadata only A novel approach to treat the Thiel-Behnke corneal dystrophy using 3D printed honeycomb-shaped polymethylmethacrylate (PMMA)/Vancomycin (VAN) scaffolds(Elsevier B.V., 2021) ŞAHİN, ALİ; Ulag S., Sahin A., Guncu M.M., Aksu B., Ekren N., Sengor M., Kalaskar D.M., Gunduz O.Thiel-Behnke corneal dystrophy, or honeycomb corneal dystrophy, is an autosomal dominant corneal disorder. Tissue engineering can be a novel approach to regenerate this dystrophy. In this study, the honeycomb geometry of the dystrophy mimicked with a 3D printing technology, and 40% PMMA, 40% PMMA/(0.1, 0.5, 2, and 10)% VAN scaffolds were fabricated with honeycomb geometry. As a result of the biocompatibility test with mesenchymal stem cells (MSCs), it can be said that cells on the scaffolds showed high viability and proliferation for all incubation periods. According to the antibacterial activity results, the 40% PMMA/10% VAN showed antibacterial activity against S. aureous. Mechanical results reported that with the addition of VAN into the 40% PMMA, the tensile strength value increased up to 2% VAN amount. The swelling behaviours of the scaffolds were examined in vitro, and found that the swelling rate increased with a high VAN amount. The release of VAN from the scaffolds showed sustained release behaviour, and it took 13 days to be released entirely from the scaffolds. © 2021 Elsevier B.V.