Publication:
A new severe plastic deformation method: thin-walled open channel angular pressing (TWO-CAP)

Simple item page
dc.contributor.authorKENTLİ, AYKUT
dc.contributor.authorsSahbaz, Mehmet; Kaya, Hasan; Kentli, Aykut
dc.date.accessioned2022-03-14T09:19:56Z
dc.date.available2022-03-14T09:19:56Z
dc.date.issued2020-01
dc.description.abstractIn this study, a novel severe plastic deformation method, named as thin-walled open channel angular pressing (TWO-CAP), was developed and applied to AZ31 magnesium alloy beams in U-type cross-sectional shape. First of all, the principles of the method with all parameters were determined, and the analytical model of the system was generated, and then the study was supported with the numerical analysis. Then, a proper experimental setup was established by considering theoretic outputs. After that, AZ31 magnesium alloy specimens were machined from bulk material in U-type shape as to fit the die channel, and then these specimens were annealed and pressed along the TWO-CAP die. Following the experimental studies, the specimens were tested in order to define the changes in mechanical and microstructural properties. In this stage, the tension test and hardness test were applied to determine the mechanical properties, while optical microscope, scanning electron microscope, energy dispersive spectrometry, X-ray diffraction, and transmission electron microscope analyses were applied to see the changes in microstructure. As a result, an improvement on strength, hardness, and toughness was observed depending on the changes on the microstructure and grain refinement due to the large plastic deformation.
dc.identifier.doi10.1007/s00170-019-04748-1
dc.identifier.eissn1433-3015
dc.identifier.issn0268-3768
dc.identifier.urihttps://hdl.handle.net/11424/242974
dc.identifier.wosWOS:000511574900054
dc.language.isoeng
dc.publisherSPRINGER LONDON LTD
dc.relation.ispartofINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectAZ31 magnesium alloy
dc.subjectMechanical properties
dc.subjectMicrostructure
dc.subjectSEM-EDS
dc.subjectSPD
dc.subjectTEM
dc.subjectXRD
dc.subjectAZ31 MAGNESIUM ALLOY
dc.subjectULTRAFINE-GRAINED MATERIALS
dc.subjectMECHANICAL-PROPERTIES
dc.subjectMICROSTRUCTURAL EVOLUTION
dc.subjectHOMOGENEITY
dc.titleA new severe plastic deformation method: thin-walled open channel angular pressing (TWO-CAP)
dc.typearticle
dspace.entity.typePublication
local.avesis.id92c6afc2-423f-4d07-bc67-aade30a8c3e4
local.import.packageSS16
local.indexed.atWOS
local.indexed.atSCOPUS
local.journal.numberofpages10
local.journal.quartileQ2
oaire.citation.endPage1496
oaire.citation.issue3-4
oaire.citation.startPage1487
oaire.citation.titleINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
oaire.citation.volume106
relation.isAuthorOfPublicationcf5e519e-39bd-4c19-9408-5648f713069f
relation.isAuthorOfPublication.latestForDiscoverycf5e519e-39bd-4c19-9408-5648f713069f

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Şahbaz et al. - 2020 - A new severe plastic deformation method thin-wall.pdf
Size:
9.41 MB
Format:
Adobe Portable Document Format
Download

Collections

Research Outputs