Person: GÜL, MEHMET ZAFER
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
GÜL
First Name
MEHMET ZAFER
Name
6 results
Search Results
Now showing 1 - 6 of 6
Publication Open Access A validation methodology for urea spray on selective catalytic reduction systems(2022-06-01) GÜL, MEHMET ZAFER; Savci I. H., GÜL M. Z., Sener R.Selective catalytic reduction (SCR) is an emission control method that reduces the NOx emission using urea sprays as ammonia precursors for exhaust after-treatment systems. The urea injection system is an essential component of the SCR systems. A comprehensive SCR modeling approach is required to design compact after-treatment systems that meet the NOx emission legislation level. In this study, the characteristics of urea spray injectors of the SCR system were investigated using computational fluid dynamics (CFD) and the particle image velocimetry (PIV) technique. A validation strategy was developed to model the urea spray evaporation, liquid/wall contact, and formation of solid urea deposits. The sheet atomization model was modified to improve the performance of the CFD model. While the Rosin-rammler method predicted the results of 10% according to the experimental results, the proposed tabular method decreased the difference by 3%. In addition, 500 parcels were determined as an optimum number of parcels for urea spray according to the sensitivity study. Therefore, the validation methodology was proposed to predict more consistent results for urea spray modeling and the formation of solid urea deposits.Publication Metadata only Effects of injection strategy and combustion chamber modification on a single-cylinder diesel engine(ELSEVIER SCI LTD, 2020) GÜL, MEHMET ZAFER; Sener, Ramazan; Yangaz, Murat Umut; Gul, Mehmet ZaferThe diesel engine is widely used due to its thermal efficiency, reliability and fuel economy, while diesel engine emissions are harmful to the environment and human health. Therefore, the standards (EPA, Tier, NRE-v/c standards, etc.) limit the exhaust emission of engines around the world. The most successful method of reducing emissions is to optimize the combustion chamber and the fluid motion inside the engine. In this study, experimental and numerical methods were used in a diesel engine to analyze fluid motion, spray, combustion process, and exhaust emissions. A new type of swirl piston bowls and a reentrant piston bowl were utilized on a baseline diesel engine. Different spray angles and injection pressures were applied and results were compared with the baseline design. Results show that the piston bowl shape has a critical influence on engine performance and emissions. Since the multi-swirl piston bowl (MSB) and double-swirl piston bowl (DSB) design increases in-cylinder swirl and turbulence, it contributes to reducing emissions and improving the combustion process. Increasing spray angle and injection pressure and using of DSB can reduce the soot emissions by 81%. DSB and MSB improve the combustion process but also increase NOx emissions due to increased in-cylinder temperature. On the other hand, NOx emissions may also be reduced if the injection parameters of the engine are optimized to provide the same power with the new swirl bowls.Publication Metadata only Optimization of the combustion chamber geometry and injection parameters on a light-duty diesel engine for emission minimization using multi-objective genetic algorithm(ELSEVIER SCI LTD, 2021) GÜL, MEHMET ZAFER; Sener, Ramazan; Gul, M. ZaferCombustion efficiency and exhaust emission of the compression-ignition engines are highly dependent on the combustion chamber design. In this study, shape optimization was performed to reduce the emissions and maximize the combustion efficiency of a compression ignition engine with the guidance of computational fluid dynamics (CFD). The aim was to optimize diesel combustion efficiency while maintaining engine power and torque. A double-swirl piston bowl is used, and the bowl depth, bowl diameter, and other dimensions of the piston bowl are optimized to minimize the soot and NOX emission while meeting the IMEP target. The spray angle of the injector, SOI, and injector protrusion were parametrized to meet the optimization targets. The numerical model was developed using Converge software. CAESES software and multi-objective genetic algorithm (MOGA) were used to automatically change the chamber design parameters and to optimize the piston bowl geometry. A total of 104 different combustion chamber designs and 23 varied injection parameters were determined parametrically and the optimum case was decided with the MOGA. A comprehensive optimization study was carried out using experimental, CFD, and MOGA methods. Compared to the baseline design, the optimized new piston bowl design has provided enhanced in-cylinder air utilization and rapid mixing-controlled combustion, resulting in enhanced fuel efficiency. The optimized design emits remarkably lower NOX and soot emissions.Publication Open Access Effect of air pressure on nanofiber production in solution blowing method(GAZI UNIV, FAC ENGINEERING ARCHITECTURE, 2020-07-21) EKİCİ, BÜLENT; Polat, Yusuf; Yangaz, Murat Umut; Calisir, Mehmet Durmus; Gul, Mehmet Zafer; Demir, Ali; Ekici, Bulent; Kilic, AliIn this study, effect of air pressure on nanofiber diameter and morphology was studied for solution blowing technique. A computational fluid dynamics (CFD) analysis was realized via ANSYS (R) Fluent software, and the results were compared with experimental solutions. The results showed that an increase in air inlet pressure from 100 kPa to 300 kPa has significant effect on nanofiber diameter and morphology. In contrast, as the air inlet pressure increases above 300 kPa to 600 kPa, both nanofiber diameter increases, and the fiber agglomerations are observed due to high turbulence intensity. The droplets were observed at 100 kPa air inlet pressure due to low driving force applied to the polymer solution. The effects of air pressure on nanofiber diameter and morphology have been investigated by using finite volume method, and the results are compared with the experimental results.Publication Open Access A methodology to assess mixer performance for selective catalyst reduction application in hot air gas burner(2022-09-01) GÜL, MEHMET ZAFER; Savci I. H., Gul M. Z.The active SCR aftertreatment system is one of the most crucial technology for the NOx reduction of diesel engines. One of the essential parameters of this technology is the urea spray performance on the catalyst.This study presents an experimental and numerical investigation of urea spray behavior used in the heavy-duty diesel engine\"s selective catalytic reduction (SCR) aftertreatment systems. The custom test rig is designed and built to simulate exhaust aftertreatment systems of heavyduty diesel vehicles. Urea injector parameters were observed in this test rig with optic windows for spray and flow visualization. This test rig is available to simulate diesel engines in the sense of exhaust mass flow rate, temperature and spray control unit. The discussion is made about the effects of droplet size of spray and velocity distribution upon flow characterization.A detailed assessment of the numerical model was presented, and validation was carried out for different interest measurement locations. The predicted droplet size distributions, breakup performance, and velocities are numerically and correlated with the experimental data. The validated model is subsequently used to study the urea-flow mixing dynamics to develop a urea mixer numerically. Test results show that smaller droplets enhance the mixing and thus catalyst efficiency. Mixer design performance can be assessed numerically in the droplet size break up based on the developed criteria called mixer performance criteria. Upstream and downstream of the mixer, droplet size can be extracted from the simulation, and different mixer designs can be compared in terms of the breakup performance.(c) 2021 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/Publication Open Access A Two-Time-Scale Turbulence Model and Its Application in Free Shear Flows(2024-02-01) GÜL, MEHMET ZAFER; YANGAZ, MURAT UMUT; GÜL M. Z., YANGAZ M. U., Sen S.A novel three-equation turbulence model has been proposed as a potential solution to overcome some of the issues related to the k–ε models of turbulence. A number of turbulence models found in the literature designed for compressed turbulence within internal combustion engine cylinders tend to exhibit limitations when applied to turbulent shear flows, such as those occurring through intake or exhaust valves of the engine. In the event that the flow is out of equilibrium where Pk deviates from ε, the turbulence models require a separate turbulence time-scale determiner along with the dissipation, ε. In the current research, this is accomplished by resolving an additional equation that accounts for turbulence time scale, τ. After presenting the rationale behind the model, its application to three types of free shear flows were given. It has been shown that the three-equation k–ε–τ model outperforms the standard k–ε model as well as a number of two-equation models in these flows. Initially, the k–ε–τ model handles the issue of the plane jet/round jet anomaly in an effective manner. Secondly, it outperforms the two-equation models in predicting the flow behavior in the case of plane wake, one that is distinguished by its weak shear form.