Person: DEMİR, SERAP
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
DEMİR
First Name
SERAP
Name
5 results
Search Results
Now showing 1 - 5 of 5
Publication Metadata only Immobilization of alpha-amylase onto poly(glycidyl methacrylate) grafted electrospun fibers by ATRP(ELSEVIER, 2015) OKTAY, BURCU; Oktay, Burcu; Demir, Serap; Kayaman-Apohan, NilhanIn this study, novel alpha-amylase immobilized poly(vinyl alcohol) (PVA) nanofibers were prepared. The PVA nanofiber surfaces were functionalized with 2-bromoisobutyryl bromide (BiBBr) and followed by surface initiated atom transfer radical polymerization (SI-ATRP) of glycidyl methacrylate (GMA). The morphology of the poly(glycidyl methacrylate) (PGMA) grafted PVA nanofibers was characterized by scanning electron microscopy (SEM). Also PGMA brushes were confirmed by X-ray photo electron microscopy (XPS). alpha-Amylase was immobilized in a one step process onto the PGMA grafted PVA nanofiber. The characteristic properties of the immobilized and free enzymes were examined. The thermal stability of the enzyme was improved and showed maximum activity at 37 degrees C by immobilization, pH values of the maximum activity of the free and immobilized enzymes were also found at 6.0 and 6.5, respectively. Free enzyme lost its activity completely within 15 days. The immobilized enzyme lost only 23.8% of its activity within 30 days. (C) 2015 Elsevier B.V. All rights reserved.Publication Metadata only Nonhydrolytic sol-gel synthesized oligosiloxane resin reinforced thiol-ene photocured coatings for the immobilization of acetylcholinesterase(SPRINGER, 2019) ÇAKMAKÇI, EMRAH; Cakmakci, Emrah; Demir, SerapAcetylcholinesterase (AChE), which is responsible for the hydrolysis of neurotransmitter acetylcholine, is a critical enzyme for the nervous system and also a biomarker for organophosphorous pesticide detection. The immobilization of AChE is an active area of research and recently the use of sol-gel-derived materials for enzyme immobilization has gained a lot of attraction. In this work, AChE was covalently immobilized onto a photocured substrate which was reinforced with an oligosiloxane resin. The oligosiloxane resin was designed to have both vinyl and epoxide groups and prepared via nonhydrolytic sol-gel technique. The strategy employed in this study offered a platform that has good mechanical and thermal properties and also suitable for modification. Thus, AChE was also immobilized onto these substrates after amine modification of the epoxy groups and followed by glutaraldehyde activation. Over 80% enzyme immobilization yield was achieved. At certain pH values (5.5 and 8.5) and under relatively higher temperatures (above 40 degrees C) the immobilized enzymes were found to have higher catalytic activity than the free enzyme. Furthermore, by immobilization the reuse and the storage stability of the enzyme was improved and the stability of the immobilized enzyme against the inhibitory effects of certain metal cations was enhanced [GRAPHICS] . Nonhydrolytic sol-gel synthesized oligosiloxane resin reinforced thiol-ene photocured coatings for the immobilization of acetylcholinesterase. Emrah CAKMAKCI, Serap DEMIR. HighlightsAn oligosiloxane resin was prepared via nonhydrolytic sol-gel technique.The oligosiloxane resin was used to reinforce thiol-ene photocured coatings.Acetylcholinesterase was immobilized onto the photocured coatings.By immobilization, storage stability, reuse and metal ion resistance were improved.Publication Metadata only Alpha-Amylase Immobilization on Epoxy Containing Thiol-Ene Photocurable Materials(KOREAN SOC MICROBIOLOGY & BIOTECHNOLOGY, 2013) ÇAKMAKÇI, EMRAH; Cakmakci, Emrah; Danis, Ozkan; Demir, Serap; Mulazim, Yusuf; Kahraman, Memet VezirThiol-ene polymerization is a versatile tool for several applications. Here we report the preparation of epoxide groups containing thiol-ene photocurable polymeric support and the covalent immobilization of alpha-amylase onto these polymeric materials. The morphology of the polymeric support was characterized by scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) coupled with SEM was used to explore the chemical composition. The polymeric support and the immobilization of the enzyme were characterized by FTIR analysis. SEM-EDS and FTIR results showed that the enzyme was successfully covalently attached to the polymeric support. The immobilization efficiency and enzyme activity of alpha-amylase were examined at various pH (5.0-8.0) and temperature (30-80 degrees C) values. The storage stability and reusability of immobilized alpha-amylase were investigated. The immobilization yield was 276 +/- 1.6 mg per gram of polymeric support. Enzyme assays demonstrated that the immobilized enzyme exhibited better thermostability than the free one. The storage stability and reusability were improved by the immobilization on this enzyme support. Free enzyme lost its activity completely within 15 days. On the other hand, the immobilized enzyme retained 86.7% of its activity after 30 days. These results confirm that alpha-amylase was successfully immobilized and gained a more stable character compared with the free one.Publication Metadata only Immobilization of alpha- amylase on aminated polyimide membrane: Preparation, characterization, and properties(WILEY-V C H VERLAG GMBH, 2014) ÇAKMAKÇI, EMRAH; Cakmakci, Emrah; Cigil, Asli Beyler; Danis, Ozkan; Demir, Serap; Kahraman, Memet Vezir-amylase was covalently immobilized on functionalized polyimide (PI) membranes via glutaraldehyde (GA) activation. 3,3,4,4-Benzophenonetetracarboxylic acid dianhydride (BTDA) and 4,4-oxydianline (4,4-ODA) based polyimide membranes were obtained via thermal imidization. Free amine groups on the surface of the polyimide membranes were generated by the amination reaction of polyimides with hexamethylenediamine (HMDA). Surface-aminated membranes were subjected to enzyme immobilization after GA activation. Immobilization efficiency and enzyme activity of -amylase was examined at various pH (3.0-8.0) and temperature (15-80 degrees C). The storage stability and reusability of immobilized -amylase were investigated. Immobilization yield was found as 359.53mg per gram of modified polyimide films. Enzyme assays demonstrated that the immobilized enzyme exhibited better thermo stability than the free one. The storage stability and reusability improved by the immobilization on this enzyme support. Free enzyme lost its activity completely within 15 days. On the other hand, the immobilized enzyme retained 79.98% of its activity after 30 days. These results confirmed that -amylase was successfully immobilized and gained more stable character compared to the free enzyme.Publication Metadata only Amine functional magnetic nanoparticles via waterborne thiol-ene suspension photopolymerization for antibody immobilization(ELSEVIER SCIENCE BV, 2018) OGAN, AYŞE; Muhsir, Pelin; Cakmakci, Emrah; Demir, Serap; Ogan, AyseThe modification of magnetic nanoparticles (MNPs) via different routes for biomolecule binding is an attractive area of research. Waterborne thiol-ene suspension photopolymerization (TESP) can be a useful method for preparing functional MNPs. In this study, for the very first time waterborne TESP was performed in the presence of MNPs. Neat MNPs were coated and in situ functionalized with amine groups by using thiol-ene chemistry. Engrailed-2 (EN2) protein, a potential biomarker for various cancers such as prostate cancer, bladder cancer, breast cancer and ovarian cancer, is known to be a strong binder to a specific DNA sequence (50-TAATTA-30) to regulate transcription. Anti-EN2 antibodies were immobilized onto these MNPs by physical adsorption and covalent bonding methods, respectively. The amount of the physically immobilized antibodies (0.54 mg/g) were found to be lower than the loading of the covalently bonded antibodies (1.775 mg/g). The biomarker level in the artificial solutions prepared was determined by enzyme-linked immunosorbent assay. Coated MNPs were characterized by FTIR, TGA, SEM and STEM. After TESP, the average diameter of the neat magnetite nanoparticles increased from similar to 15 nm to similar to 32 nm.