Person: EKREN, NAZMİ
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
EKREN
First Name
NAZMİ
Name
8 results
Search Results
Now showing 1 - 8 of 8
Publication Metadata only Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application(SPRINGER, 2020) BİLĞİÇ ALKAYA, DİLEK; Cesur, Sumeyye; Oktar, Faik Nuzhet; Ekren, Nazmi; Kilic, Osman; Alkaya, Dilek Bilgic; Seyhan, Serap Ayaz; Ege, Zeynep Ruya; Lin, Chi-Chang; Erdem, Serap; Erdemir, Gokce; Gunduz, OguzhanBone tissue engineering has begun to draw attention in recent years. The interactive combination of biomaterials and cells is part of bone tissue engineering. Sodium alginate (SA) is a biologically compatible, degradable, non-toxic natural polymer accepted by the human body and is widely used in the field of tissue engineering. Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. Hydroxyapatite (HA) and tricalcium phosphate (TCP) derived from natural sources such as marine species and bovine bone are biocompatible and non-toxic biomaterials which are used to reconstruct many parts of the skeleton. In this study, PLA, SA with different compositions, and nanofibers obtained by adding orange spiny oyster shell powders (Spondylus barbatus) to them by using electrospining technique. Cell culture study, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and physical analysis such as density, electrical conductivity, surface tension, viscosity measurement, and tensile strength measurement tests were carried out after the production process. Produced nanofibers showed smooth and beadless surface. The average diameters and distributions decreased with the addition of optimum PLA and TCP amount. The tensile strength of nanofibers was enhanced with the additional SA and TCP. The produced nanofibers are compatible with human bone tissue, which are not cytotoxic, and in addition, a high cell efficiency of SaOS-2 cells on the nanofibers was observed with SEM images.Publication Metadata only Fabrication and characterization of pla/sa/ha composite nanofiber by electrospinning for bone tissue engineering applications(2018-07-18) CESUR, SÜMEYYE; EKREN, NAZMİ; KILIÇ, OSMAN; OKTAR, FAİK NÜZHET; BİLĞİÇ ALKAYA, DİLEK; AYAZ SEYHAN, SERAP; GÜNDÜZ, OĞUZHAN; Cesur S., Ekren N., Kılıç O., Oktar F. N., Bilğiç Alkaya D., Ayaz Seyhan S., Ege Z. R., Gündüz O.Publication Metadata only Patch-Based Technology for Corneal Microbial Keratitis(Springer, 2020) AKSU, MEHMET BURAK; Ulag S., Ilhan E., Aksu B., Sengor M., Ekren N., Kilic O., Gunduz O.Corneal opacities, which happened mainly due to microbial keratitis, are the fourth cause of blindness worldwide. Antimicrobial therapy is an alternative solution for microbial keratitis caused by Staphylococcus aureus and Pseudomonas Aeruginosa. The aim of this study, to develop patches for the treatment of corneal keratitis which caused significant corneal blindness by using electrospinning method. Polyvinyl-alcohol (PVA) patches with Gelatine (GEL) studied in various ratios. Different amounts of gelatine added to PVA to resemble the collagen fibril structure of the cornea. To enable the patches to the antimicrobial effect against the bacterias, the special plant extract was used. The produced corneal patches were examined separately for chemical, morphological, and antimicrobial properties. Scanning electron microscope (SEM), Fourier-transform infrared (FT-IR) spectroscopy were performed to observe the surface morphology and chemical structure of the patches, respectively. © Springer Nature Switzerland AG 2020.Publication Metadata only Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application(Springer, 2020) ŞAHİN, ALİ; Ilhan E., Ulag S., Sahin A., Ekren N., Kilic O., Oktar F.N., Gunduz O.In recent years, scaffolds produced in 3D printing technology have become more widespread tool due to providing more advantages than traditional methods in tissue engineering applications. In this research, it was aimed to produce patches for the treatment of tympanic membrane perforations which caused significant hearing loss by using 3D printing method. Polylactic acid (PLA) scaffolds with Chitosan (CS) added in various ratios were prepared for artificial eardrum patches. Different amounts of CS added to PLA to obtain more biocompatible scaffolds. The created patches were designed by mimicking the thickness of the natural tympanic membrane thanks to the precision provided by the 3D printed method. The produced scaffolds were analyzed separately for physical, chemical, morphological, mechanical and biocompatibility properties. Human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) were used for cell culture study to analyze the biocompatibility properties. 15 wt% PLA was chosen as the control group. Scaffold containing 3 wt% CS demonstrated significantly superior and favorable features in printing quality. The study continued with these two scaffolds (15PLA and 15PLA/3CS). This study showed that PLA and PLA/CS 3D printed scaffolds are a potential application for repairing tympanic membrane perforation. © Springer Nature Switzerland AG 2020.Publication Metadata only Novel electrospun polycaprolactone/graphene oxide/Fe3O4 nanocomposites for biomedical applications(ELSEVIER SCIENCE BV, 2018) OKTAR, FAİK NÜZHET; Aydogdu, Mehmet Onur; Ekren, Nazmi; Suleymanoglu, Mediha; Erdem-Kuruca, Serap; Lin, Chi-Chang; Bulbul, Ertugrul; Erdol, Meltem Nur; Oktar, Faik Nuzhet; Terzi, Umit Kemalettin; Kilic, Osman; Gunduz, OguzhanIn this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe3O4) nanocomposite fibers as biocompatible scaffolds for biomedical applications. Products were analyzed by scanning electron microscopy (SEM) for morphological analysis of the electrospun nanocomposites and Fourier Transform Infrared Spectroscopy (FTIR) was used to determine functional groups of the PCL, GO, and Fe3O4 materials in the electrospun nanocomposites. For physical properties, viscosity, density, permittivity, dielectric loss and liquid and solid state alternating current conductivity, measurements were done for each nanocomposite fibers. Effects of concentration percentage of GO on permittivity, dielectric loss and AC conductivity have been analyzed by using measured and calculated data. Trend lines have been drawn for permittivity, dielectric loss and conductivity via concentration percentage of GO. The relation between ac conductivity and frequency have been studied for each concentration percentage of GO and interpretations have been done by using the obtained results.Publication Metadata only Synthesis, characterization, and biological properties of composites of hydroxyapatite and hexagonal boron nitride(WILEY, 2018) OKTAR, FAİK NÜZHET; Unal, Semra; Ekren, Nazmi; Sengil, Ahmet Z.; Oktar, Faik N.; Irmak, Ster; Oral, Ozlem; Sahin, Yesim M.; Kilic, Osman; Agathopoulos, Simeon; Gunduz, OguzhanHydroxyapatite (HA), obtained from bovine bones, was successfully reinforced with hexagonal boron nitrite (h-BN). h-BN/HA composites, with BN content up to 1.5 wt %, were sintered at various temperatures between 1000 and 1300 degrees C, in air. Well-sintered samples were obtained after sintering at 1200 and 1300 degrees C. The presence of h-BN contributed to dense, fine, and well-crystallized microstructure. The results of X-ray diffraction analysis and FT-IR spectroscopy showed that the produced composites comprised biphasic beta-TCP/HCA (HCA: carbonate partially substituted HA). High values of mechanical properties were achieved, namely compression strength 155 MPa for the sample 0.5% h-BN/HA and Vickers microhardness of 716 HV for the samples 1.5% h-BN/HA, both sintered at 1300 degrees C. U2OS human bone osteosarcoma proliferation and cell viability showed no adverse effect in the presence of h-BN/HA, suggesting the potential use of the produced materials as safe biomaterials in bone tissue engineering. (C) 2017 Wiley Periodicals, Inc.Publication Metadata only Nanofibrous wound dressing material by electrospinning method(TAYLOR & FRANCIS AS, 2019) İNAN, AHMET TALAT; Yeniay, Eda; Ocal, Leyla; Altun, Esra; Giray, Betul; Oktar, Faik Nuzhet; Inan, Ahmet Talat; Ekren, Nazmi; Kilic, Osman; Gunduz, OguzhanWound dressings are very useful materials for accelerating the wound healing process. In this study, nanofibrous wound dressings were produced from blending solution of Poly-lactic acid(PLA)/Chitosan(C)/Starch(S)/Zinc oxide(Z) by electrospinning method. Morphology, chemical interaction, mechanical, water uptake and weight loss tests were performed on each samples. Moreover, the biocompatibility of primary dermal fibroblast (ATCC, PCS-201-012) on prepared wound dressings was investigated with MTT assays in vitro, and the samples were found suitable for cell viability and proliferation. These results suggest that produced nanofibrous wound dressings can be promising candidate for wound dressing applications. [GRAPHICS] .Publication Metadata only 3D printing of chitosan/ poly(vinyl alcohol) hydrogel containing synthesized hydroxyapatite scaffolds for hard-tissue engineering(ELSEVIER SCI LTD, 2019) KARTAL, İLYAS; Ergul, Necdet Mekki; Unal, Semra; Kartal, Ilyas; Kalkandelen, Cevriye; Ekren, Nazmi; Kilic, Osman; Chi-Chang, Lin; Gunduz, OguzhanIn recent years, 3D printed scaffolds becoming a widespread tool, which supports the repair mechanism of natural tissues. In order to support this knowledge, we used 3D printing methods to fabricated Chitosan (CH)/poly(vinyl alcohol)(PVA)-based scaffolds contains with a various ratio of hydroxyapatite (HA) (2.5, 5, 10, and 15 wt%). These composited scaffolds were further characterized for their chemical, morphological, mechanical, and biocompatibility properties. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), swelling test, and compressive strength test were performed to reveal structural, mechanical and chemical characteristics of scaffolds. Among others, 15 wt% HA contained group demonstrated significantly superior and beneficial features in printing quality. Also, the results reveal that scaffolds have similar elastic modulus to natural bone. Bone morphogenetic protein-2 (BMP-2) protein was added to the most successful mechanically produced sample. As a result, it was shown that Chitosan/PVA/HA (15 wt%) with BMP-2 tissue scaffold could form a three-dimensional natural extracellular scaffold suitable for human mesenchymal stem cells. Altogether, these results show that hydroxyapatite added scaffolds produced may be a promising approach for bone tissue engineering applications.