Person: EKREN, NAZMİ
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
EKREN
First Name
NAZMİ
Name
6 results
Search Results
Now showing 1 - 6 of 6
Publication Metadata only Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application(SPRINGER, 2020) BİLĞİÇ ALKAYA, DİLEK; Cesur, Sumeyye; Oktar, Faik Nuzhet; Ekren, Nazmi; Kilic, Osman; Alkaya, Dilek Bilgic; Seyhan, Serap Ayaz; Ege, Zeynep Ruya; Lin, Chi-Chang; Erdem, Serap; Erdemir, Gokce; Gunduz, OguzhanBone tissue engineering has begun to draw attention in recent years. The interactive combination of biomaterials and cells is part of bone tissue engineering. Sodium alginate (SA) is a biologically compatible, degradable, non-toxic natural polymer accepted by the human body and is widely used in the field of tissue engineering. Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. Hydroxyapatite (HA) and tricalcium phosphate (TCP) derived from natural sources such as marine species and bovine bone are biocompatible and non-toxic biomaterials which are used to reconstruct many parts of the skeleton. In this study, PLA, SA with different compositions, and nanofibers obtained by adding orange spiny oyster shell powders (Spondylus barbatus) to them by using electrospining technique. Cell culture study, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and physical analysis such as density, electrical conductivity, surface tension, viscosity measurement, and tensile strength measurement tests were carried out after the production process. Produced nanofibers showed smooth and beadless surface. The average diameters and distributions decreased with the addition of optimum PLA and TCP amount. The tensile strength of nanofibers was enhanced with the additional SA and TCP. The produced nanofibers are compatible with human bone tissue, which are not cytotoxic, and in addition, a high cell efficiency of SaOS-2 cells on the nanofibers was observed with SEM images.Publication Metadata only Production and Characterization of Antimicrobial Electrospun Nanofibers Containing Polyurethane, Zirconium Oxide and Zeolite(SPRINGER, 2018) OKTAR, FAİK NÜZHET; Aydogdu, Mehmet Onur; Oprea, Alexandra Elena; Trusca, Roxana; Surdu, Adrian Vasile; Ficai, Anton; Holban, Alina Maria; Iordache, Florin; Paduraru, Andrei Viorel; Filip, Diana Georgiana; Altun, Esra; Ekren, Nazmi; Oktar, Faik Nuzhet; Gunduz, OguzhanIn this study, electrospinning technique has been utilized to prepare composite nanofiber mats of polyurethane (PU)/zirconium dioxide (ZrO2) and PU/zeolite, consisted by antimicrobial properties. Tensile strength measurement test was performed for the mechanical analysis of the nanofibers. Scanning electron microscopy (SEM) were performed for displaying the morphological features of the fiber structure. XRD tests were performed for revealing the chemical structure. Antimicrobial tests were also performed to display antimicrobial effects of the produced materials. In vitro test was also performed to determine cytotoxicity and biocompatibility. The present PU/ZrO2 and PU/zeolite composite nanofibers resulted with improved mechanical properties and good antimicrobial properties against either their pure forms or other studies. Cell proliferation and viability also increased significantly with increase in zeolite and ZrO2 ratio. It is concluded that this composition provides a novel alternative as an antimicrobial material which can be suitable as a wound dressing or a coating material for various healthcare engineering applications.Publication Metadata only Patch-Based Technology for Corneal Microbial Keratitis(Springer, 2020) AKSU, MEHMET BURAK; Ulag S., Ilhan E., Aksu B., Sengor M., Ekren N., Kilic O., Gunduz O.Corneal opacities, which happened mainly due to microbial keratitis, are the fourth cause of blindness worldwide. Antimicrobial therapy is an alternative solution for microbial keratitis caused by Staphylococcus aureus and Pseudomonas Aeruginosa. The aim of this study, to develop patches for the treatment of corneal keratitis which caused significant corneal blindness by using electrospinning method. Polyvinyl-alcohol (PVA) patches with Gelatine (GEL) studied in various ratios. Different amounts of gelatine added to PVA to resemble the collagen fibril structure of the cornea. To enable the patches to the antimicrobial effect against the bacterias, the special plant extract was used. The produced corneal patches were examined separately for chemical, morphological, and antimicrobial properties. Scanning electron microscope (SEM), Fourier-transform infrared (FT-IR) spectroscopy were performed to observe the surface morphology and chemical structure of the patches, respectively. © Springer Nature Switzerland AG 2020.Publication Metadata only Investigation of light transmittance of coatings containing sio2 and tio2 nano-particle made by electrospinning technique(2022-04-07) EKREN, NAZMİ; SAĞLAM, ŞAFAK; SARKIN A. S., EKREN N., SAĞLAM Ş.The electrospinning technique is a coating method with controllable parameters. This study aims to make a coating that increases light transmission, reduces reflection, and has self-cleaning properties on laboratory slide glasses by the electrospinning method. Studies in the literature were investigated that had been used SiO2, TiO2, polymers for it. PLA and PMMA were used as polymers, SiO2 and TiO2 were used as nanoparticles, and Chloroform was used as the solvent. Solutions were prepared at different mixtures and ratios. The solutions were applied with different electrospinning parameters. The coatings were examined in terms of surface adhesion and surface distribution, and some were found to be successful. The light transmittance was the highest with 66.2% in solution-6 containing 1.6 g PLA and 0.05 g SiO2. In coatings containing SiO2 and TiO2, the light transmittance of solution-7 with 1.6 g PLA, 0.025 g SiO2, and 0.025 g TiO2 was 64.8%, and solution-10 with 2 g PLA and 0.05 g SiO2, and 0.05 g TiO2 had 64.4% light transmission.Publication Metadata only Novel electrospun polycaprolactone/graphene oxide/Fe3O4 nanocomposites for biomedical applications(ELSEVIER SCIENCE BV, 2018) OKTAR, FAİK NÜZHET; Aydogdu, Mehmet Onur; Ekren, Nazmi; Suleymanoglu, Mediha; Erdem-Kuruca, Serap; Lin, Chi-Chang; Bulbul, Ertugrul; Erdol, Meltem Nur; Oktar, Faik Nuzhet; Terzi, Umit Kemalettin; Kilic, Osman; Gunduz, OguzhanIn this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe3O4) nanocomposite fibers as biocompatible scaffolds for biomedical applications. Products were analyzed by scanning electron microscopy (SEM) for morphological analysis of the electrospun nanocomposites and Fourier Transform Infrared Spectroscopy (FTIR) was used to determine functional groups of the PCL, GO, and Fe3O4 materials in the electrospun nanocomposites. For physical properties, viscosity, density, permittivity, dielectric loss and liquid and solid state alternating current conductivity, measurements were done for each nanocomposite fibers. Effects of concentration percentage of GO on permittivity, dielectric loss and AC conductivity have been analyzed by using measured and calculated data. Trend lines have been drawn for permittivity, dielectric loss and conductivity via concentration percentage of GO. The relation between ac conductivity and frequency have been studied for each concentration percentage of GO and interpretations have been done by using the obtained results.Publication Metadata only Nanofibrous wound dressing material by electrospinning method(TAYLOR & FRANCIS AS, 2019) İNAN, AHMET TALAT; Yeniay, Eda; Ocal, Leyla; Altun, Esra; Giray, Betul; Oktar, Faik Nuzhet; Inan, Ahmet Talat; Ekren, Nazmi; Kilic, Osman; Gunduz, OguzhanWound dressings are very useful materials for accelerating the wound healing process. In this study, nanofibrous wound dressings were produced from blending solution of Poly-lactic acid(PLA)/Chitosan(C)/Starch(S)/Zinc oxide(Z) by electrospinning method. Morphology, chemical interaction, mechanical, water uptake and weight loss tests were performed on each samples. Moreover, the biocompatibility of primary dermal fibroblast (ATCC, PCS-201-012) on prepared wound dressings was investigated with MTT assays in vitro, and the samples were found suitable for cell viability and proliferation. These results suggest that produced nanofibrous wound dressings can be promising candidate for wound dressing applications. [GRAPHICS] .