Person: ŞAHİN, ALİ
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
ŞAHİN
First Name
ALİ
Name
5 results
Search Results
Now showing 1 - 5 of 5
Publication Open Access Levodopa-Loaded 3D-Printed Poly (Lactic) Acid/Chitosan Neural Tissue Scaffold as a Promising Drug Delivery System for the Treatment of Parkinson's Disease(MDPI, 2021-11-13) ŞAHİN, ALİ; Saylam, Ezgi; Akkaya, Yigit; Ilhan, Elif; Cesur, Sumeyye; Guler, Ece; Sahin, Ali; Cam, Muhammmet Emin; Ekren, Nazmi; Oktar, Faik Nuzhet; Gunduz, Oguzhan; Ficai, Denisa; Ficai, AntonParkinson's disease, the second most common neurodegenerative disease in the world, develops due to decreased dopamine levels in the basal ganglia. Levodopa, a dopamine precursor used in the treatment of Parkinson's disease, can be used as a drug delivery system. This study presents an approach to the use of 3D-printed levodopa-loaded neural tissue scaffolds produced with polylactic acid (PLA) and chitosan (CS) for the treatment of Parkinson's disease. Surface morphology and pore sizes were examined by scanning electron microscopy (SEM). Average pore sizes of 100-200 mu m were found to be ideal for tissue engineering scaffolds, allowing cell penetration but not drastically altering the mechanical properties. It was observed that the swelling and weight loss behaviors of the scaffolds increased after the addition of CS to the PLA. Levodopa was released from the 3D-printed scaffolds in a controlled manner for 14 days, according to a Fickian diffusion mechanism. Mesenchymal stem cells (hAD-MSCs) derived from human adipose tissue were used in MTT analysis, fluorescence microscopy and SEM studies and confirmed adequate biocompatibility. Overall, the obtained results show that PLA/CS 3D-printed scaffolds have an alternative use for the levodopa delivery system for Parkinson's disease in neural tissue engineering applications.Publication Open Access Production and characterization of PLA/HA/GO nanocomposite scaffold(2022-08-12) ŞAHİN, ALİ; GÜNDÜZ, OĞUZHAN; Oktay B., Ahlatcıoğlu Özerol E., Şahin A., Gunduz O., Ustundag C. B.© 2022 Wiley-VCH GmbH.Polylactic acid (PLA) composite nanofibers combined with hydroxyapatite (HA) and graphene oxide (GO) nanoparticles were produced by electrospinning to create excellent biodegradable and durable scaffolds to be used in tissue engineering. The properties of the pure PLA, PLA/HA, PLA/GO, and PLA/HA/GO nanocomposite scaffolds were analyzed in chemical, morphological, mechanical, and biocompatibility. Morphology and composition were investigated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), respectively. To predict the cytocompatibility of these scaffolds, HFF-1 cells were cultured and the respective cell adhesion and proliferation were investigated by fluorescence microscopy, SEM, and MTT assay. FTIR results showed the successful synthesis of HA and GO nanoparticles. SEM images showed that the PLA/HA/GO scaffold is ideal for cell attachment and proliferation in tissue regeneration. Mechanical test results showed that the tensile strength and elastic modulus of PLA nanofibers could be increased by adding 0,8 wt % HA and 0,4 wt % GO. The PLA/HA/GO scaffold exhibited the highest tensile strength of other scaffolds. MTT assay revealed that the PLA/HA/GO scaffold showed significantly high biocompatibility with 105 % cell viability. Therefore, PLA/HA/GO scaffold with 0,8 wt %HA and 0,4 wt %GO possessing high tensile strength as well as good cell proliferation is an excellent and versatile biomaterial for tissue engineering applications.Publication Open Access Propolis-Based Nanofiber Patches to Repair Corneal Microbial Keratitis(MDPI, 2021-04-28) ŞAHİN, ALİ; Ulag, Songul; Ilhan, Elif; Demirhan, Ramazan; Sahin, Ali; Yilmaz, Betul Karademir; Aksu, Burak; Sengor, Mustafa; Ficai, Denisa; Titu, Aurel Mihail; Ficai, Anton; Gunduz, OguzhanIn this research, polyvinyl-alcohol (PVA)/gelatin (GEL)/propolis (Ps) biocompatible nanofiber patches were fabricated via electrospinning technique. The controlled release of Propolis, surface wettability behaviors, antimicrobial activities against the S. aureus and P. aeruginosa, and biocompatibility properties with the mesenchymal stem cells (MSCs) were investigated in detail. By adding 0.5, 1, and 3 wt.% GEL into the 13 wt.% PVA, the morphological and mechanical results suggested that 13 wt.% PVA/0.5 wt.% GEL patch can be an ideal matrix for 3 and 5 wt.% propolis addition. Morphological results revealed that the diameters of the electrospun nanofiber patches were increased with GEL (from 290 nm to 400 nm) and Ps addition and crosslinking process cause the formation of thicker nanofibers. The tensile strength and elongation at break enhancement were also determined for 13 wt.% PVA/0.5 wt.% GEL/3 wt.% Ps patch. Propolis was released quickly in the first hour and arrived at a plateau. Cell culture and contact angle results confirmed that the 3 wt.% addition of propolis reinforced mesenchymal stem cell proliferation and wettability properties of the patches. The antimicrobial activity demonstrated that propolis loaded patches had antibacterial activity against the S. aureus, but for P. aeruginosa, more studies should be performed.Publication Open Access 3D Printed Polycaprolactone/Gelatin/Bacterial Cellulose/Hydroxyapatite Composite Scaffold for Bone Tissue Engineering(MDPI, 2020-08-29) ŞAHİN, ALİ; Cakmak, Abdullah M.; Unal, Semra; Sahin, Ali; Oktar, Faik N.; Sengor, Mustafa; Ekren, Nazmi; Gunduz, Oguzhan; Kalaskar, Deepak M.Three-dimensional (3D) printing application is a promising method for bone tissue engineering. For enhanced bone tissue regeneration, it is essential to have printable composite materials with appealing properties such as construct porous, mechanical strength, thermal properties, controlled degradation rates, and the presence of bioactive materials. In this study, polycaprolactone (PCL), gelatin (GEL), bacterial cellulose (BC), and different hydroxyapatite (HA) concentrations were used to fabricate a novel PCL/GEL/BC/HA composite scaffold using 3D printing method for bone tissue engineering applications. Pore structure, mechanical, thermal, and chemical analyses were evaluated. 3D scaffolds with an ideal pore size (similar to 300 mu m) for use in bone tissue engineering were generated. The addition of both bacterial cellulose (BC) and hydroxyapatite (HA) into PCL/GEL scaffold increased cell proliferation and attachment. PCL/GEL/BC/HA composite scaffolds provide a potential for bone tissue engineering applications.Publication Metadata only Dual-drug delivery of Ag-chitosan nanoparticles and phenytoin via core-shell PVA/PCL electrospun nanofibers(ELSEVIER SCI LTD, 2021) ŞAHİN, ALİ; Hussein, Mohamed Ahmed Mohamady; Guler, Ece; Rayaman, Erkan; Cam, Muhammet Emin; Sahin, Ali; Grinholc, Mariusz; Mansuroglu, Demet Sezgin; Sahin, Yesim Muge; Gunduz, Oguzhan; Muhammed, Mamoun; El-Sherbiny, Ibrahim M.; Megahed, MosaadDual-drug delivery systems were constructed through coaxial techniques, which were convenient for the model drugs used the present work. This study aimed to fabricate core-shell electrospun nanofibrous membranes displaying simultaneous cell proliferation and antibacterial activity. For that purpose, phenytoin (Ph), a well-known proliferative agent, was loaded into a polycaprolactone (PCL) shell membrane, and as-prepared silver-chitosan nanoparticles (Ag-CS NPs), as biocidal agents, were embedded in a polyvinyl alcohol (PVA) core layer. The morphology, chemical composition, mechanical and thermal properties of the nanofibrous membranes were characterized by FESEM/STEM, FTIR and DSC. The coaxial PVA-Ag CS NPs/PCL-Ph nanofibers (NFs) showed more controlled Ph release than PVA/PCL-Ph NFs. There was notable improvement in the morphology, thermal, mechanical, antibacterial properties and cytobiocompatibility of the fibers upon incorporation of Ph and Ag-CS NPs. The proposed core-shell PVA/PCL NFs represent promising scaffolds for tissue regeneration and wound healing by the effective dual delivery of phenytoin and Ag-CS NPs.