Person: KILIÇ, OSMAN
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
KILIÇ
First Name
OSMAN
Name
14 results
Search Results
Now showing 1 - 10 of 14
Publication Metadata only Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application(SPRINGER, 2020) BİLĞİÇ ALKAYA, DİLEK; Cesur, Sumeyye; Oktar, Faik Nuzhet; Ekren, Nazmi; Kilic, Osman; Alkaya, Dilek Bilgic; Seyhan, Serap Ayaz; Ege, Zeynep Ruya; Lin, Chi-Chang; Erdem, Serap; Erdemir, Gokce; Gunduz, OguzhanBone tissue engineering has begun to draw attention in recent years. The interactive combination of biomaterials and cells is part of bone tissue engineering. Sodium alginate (SA) is a biologically compatible, degradable, non-toxic natural polymer accepted by the human body and is widely used in the field of tissue engineering. Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. Hydroxyapatite (HA) and tricalcium phosphate (TCP) derived from natural sources such as marine species and bovine bone are biocompatible and non-toxic biomaterials which are used to reconstruct many parts of the skeleton. In this study, PLA, SA with different compositions, and nanofibers obtained by adding orange spiny oyster shell powders (Spondylus barbatus) to them by using electrospining technique. Cell culture study, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and physical analysis such as density, electrical conductivity, surface tension, viscosity measurement, and tensile strength measurement tests were carried out after the production process. Produced nanofibers showed smooth and beadless surface. The average diameters and distributions decreased with the addition of optimum PLA and TCP amount. The tensile strength of nanofibers was enhanced with the additional SA and TCP. The produced nanofibers are compatible with human bone tissue, which are not cytotoxic, and in addition, a high cell efficiency of SaOS-2 cells on the nanofibers was observed with SEM images.Publication Metadata only Fabrication and characterization of pla/sa/ha composite nanofiber by electrospinning for bone tissue engineering applications(2018-07-18) CESUR, SÜMEYYE; EKREN, NAZMİ; KILIÇ, OSMAN; OKTAR, FAİK NÜZHET; BİLĞİÇ ALKAYA, DİLEK; AYAZ SEYHAN, SERAP; GÜNDÜZ, OĞUZHAN; Cesur S., Ekren N., Kılıç O., Oktar F. N., Bilğiç Alkaya D., Ayaz Seyhan S., Ege Z. R., Gündüz O.Publication Metadata only Modeling of hydrogen production with a stand-alone renewable hybrid power system(PERGAMON-ELSEVIER SCIENCE LTD, 2012) DURSUN, ERKAN; Dursun, Erkan; Acarkan, Bora; Kilic, OsmanHydrocarbon resources adequately meet today's energy demands. Due to the environmental impacts, renewable energy sources are high in the agenda. As an energy carrier, hydrogen is considered one of the most promising fuels for its high energy density as compared to hydrocarbon fuels. Therefore, hydrogen has a significant and future use as a sustainable energy system. Conventional methods of hydrogen extraction require heat or electrical energy. The main source of hydrogen is water, but hydrogen extraction from water requires electrical energy. Electricity produced from renewable energy sources has a potential for hydrogen production systems. In this study, an electrolyzer using the electrical energy from the renewable energy system is used to describe a model, which is based on fundamental thermodynamics and empirical electrochemical relationships. In this study, hydrogen production capacity of a stand-alone renewable hybrid power system is evaluated. Results of the proposed model are calculated and compared with experimental data. The MATLAB/Simscape (R) model is applied to a stand-alone photovoltaic-wind power system sited in Istanbul, Turkey. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Publication Metadata only Patch-Based Technology for Corneal Microbial Keratitis(Springer, 2020) AKSU, MEHMET BURAK; Ulag S., Ilhan E., Aksu B., Sengor M., Ekren N., Kilic O., Gunduz O.Corneal opacities, which happened mainly due to microbial keratitis, are the fourth cause of blindness worldwide. Antimicrobial therapy is an alternative solution for microbial keratitis caused by Staphylococcus aureus and Pseudomonas Aeruginosa. The aim of this study, to develop patches for the treatment of corneal keratitis which caused significant corneal blindness by using electrospinning method. Polyvinyl-alcohol (PVA) patches with Gelatine (GEL) studied in various ratios. Different amounts of gelatine added to PVA to resemble the collagen fibril structure of the cornea. To enable the patches to the antimicrobial effect against the bacterias, the special plant extract was used. The produced corneal patches were examined separately for chemical, morphological, and antimicrobial properties. Scanning electron microscope (SEM), Fourier-transform infrared (FT-IR) spectroscopy were performed to observe the surface morphology and chemical structure of the patches, respectively. © Springer Nature Switzerland AG 2020.Publication Open Access Noise identification based on spectral analysis and noisy transfer function approach for fuel cells(DE GRUYTER POLAND SP Z O O, 2020-03-20) DURSUN, ERKAN; Akinci, Tahir Cetin; Seker, Serhat; Dursun, Erkan; Kilic, OsmanIn this study, some measurements like the current, voltage and hydrogen flow based on the fuel cell are investigated in spectral-domain as well as their time-domain representations and then, their spectral properties are extracted. Besides this, taking the simplified transfer function approach into account, which is defined between the hydrogen flow and current of the cell as an input-output pair, more detailed results are obtained. Therefore, the spectral parts of the fuel cell are put into categories under the impacts coming from the process, measurement circuits and digitizers. The process noise to be defined at very small frequencies (<15 Hz) can be explained as the effects of the various physical and chemical interactions emerging in the fuel cell. Moreover, this study analysed the spectral characteristics of fuel cells for current, voltage and hydrogen flow in detail.Publication Metadata only A mobile renewable house using PV/wind/fuel cell hybrid power system(PERGAMON-ELSEVIER SCIENCE LTD, 2011) DURSUN, ERKAN; Eroglu, Mehmed; Dursun, Erkan; Seuencan, Suat; Song, Junseok; Yazici, Suha; Kilic, OsmanA photovoltaic/wind/fuel cell hybrid power system for stand-alone applications is proposed and demonstrated with a mobile house. This concept shows that different renewable sources can be used simultaneously to power off-grid applications. The presented mobile house can produce sufficient power to cover the peak load. Photovoltaic and wind energy are used as primary sources and a fuel cell as backup power for the system. The power budgeting of the system is designed based on the local data of solar radiation and wind availability. Further research will focus on the development of the data acquisition system and the implementation of automatic controls for power management. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Publication Metadata only Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application(Springer, 2020) ŞAHİN, ALİ; Ilhan E., Ulag S., Sahin A., Ekren N., Kilic O., Oktar F.N., Gunduz O.In recent years, scaffolds produced in 3D printing technology have become more widespread tool due to providing more advantages than traditional methods in tissue engineering applications. In this research, it was aimed to produce patches for the treatment of tympanic membrane perforations which caused significant hearing loss by using 3D printing method. Polylactic acid (PLA) scaffolds with Chitosan (CS) added in various ratios were prepared for artificial eardrum patches. Different amounts of CS added to PLA to obtain more biocompatible scaffolds. The created patches were designed by mimicking the thickness of the natural tympanic membrane thanks to the precision provided by the 3D printed method. The produced scaffolds were analyzed separately for physical, chemical, morphological, mechanical and biocompatibility properties. Human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) were used for cell culture study to analyze the biocompatibility properties. 15 wt% PLA was chosen as the control group. Scaffold containing 3 wt% CS demonstrated significantly superior and favorable features in printing quality. The study continued with these two scaffolds (15PLA and 15PLA/3CS). This study showed that PLA and PLA/CS 3D printed scaffolds are a potential application for repairing tympanic membrane perforation. © Springer Nature Switzerland AG 2020.Publication Metadata only Novel electrospun polycaprolactone/graphene oxide/Fe3O4 nanocomposites for biomedical applications(ELSEVIER SCIENCE BV, 2018) OKTAR, FAİK NÜZHET; Aydogdu, Mehmet Onur; Ekren, Nazmi; Suleymanoglu, Mediha; Erdem-Kuruca, Serap; Lin, Chi-Chang; Bulbul, Ertugrul; Erdol, Meltem Nur; Oktar, Faik Nuzhet; Terzi, Umit Kemalettin; Kilic, Osman; Gunduz, OguzhanIn this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe3O4) nanocomposite fibers as biocompatible scaffolds for biomedical applications. Products were analyzed by scanning electron microscopy (SEM) for morphological analysis of the electrospun nanocomposites and Fourier Transform Infrared Spectroscopy (FTIR) was used to determine functional groups of the PCL, GO, and Fe3O4 materials in the electrospun nanocomposites. For physical properties, viscosity, density, permittivity, dielectric loss and liquid and solid state alternating current conductivity, measurements were done for each nanocomposite fibers. Effects of concentration percentage of GO on permittivity, dielectric loss and AC conductivity have been analyzed by using measured and calculated data. Trend lines have been drawn for permittivity, dielectric loss and conductivity via concentration percentage of GO. The relation between ac conductivity and frequency have been studied for each concentration percentage of GO and interpretations have been done by using the obtained results.Publication Metadata only Comparative evaluation of different power management strategies of a stand-alone PV/Wind/PEMFC hybrid power system(ELSEVIER SCI LTD, 2012) DURSUN, ERKAN; Dursun, Erkan; Kilic, OsmanThis study presents different power management strategies of a stand-alone hybrid power system. The system consists of three power generation systems, photovoltaic (PV) panels, a wind turbine and a proton exchange membrane fuel cell (PEMFC). PV and wind turbine is the main supply for the system, and the fuel cell performs as a backup power source. Therefore, continuous energy supply needs energy storing devices. In this proposed hybrid system, gel batteries are used. The state of charge (SOC), charge-discharge currents are affecting the battery energy efficiency. In this study, the battery energy efficiency is evaluated with three different power management strategies. The control algorithm is using Matlab-Simulink (R). (C) 2011 Elsevier Ltd. All rights reserved.Publication Metadata only Synthesis, characterization, and biological properties of composites of hydroxyapatite and hexagonal boron nitride(WILEY, 2018) OKTAR, FAİK NÜZHET; Unal, Semra; Ekren, Nazmi; Sengil, Ahmet Z.; Oktar, Faik N.; Irmak, Ster; Oral, Ozlem; Sahin, Yesim M.; Kilic, Osman; Agathopoulos, Simeon; Gunduz, OguzhanHydroxyapatite (HA), obtained from bovine bones, was successfully reinforced with hexagonal boron nitrite (h-BN). h-BN/HA composites, with BN content up to 1.5 wt %, were sintered at various temperatures between 1000 and 1300 degrees C, in air. Well-sintered samples were obtained after sintering at 1200 and 1300 degrees C. The presence of h-BN contributed to dense, fine, and well-crystallized microstructure. The results of X-ray diffraction analysis and FT-IR spectroscopy showed that the produced composites comprised biphasic beta-TCP/HCA (HCA: carbonate partially substituted HA). High values of mechanical properties were achieved, namely compression strength 155 MPa for the sample 0.5% h-BN/HA and Vickers microhardness of 716 HV for the samples 1.5% h-BN/HA, both sintered at 1300 degrees C. U2OS human bone osteosarcoma proliferation and cell viability showed no adverse effect in the presence of h-BN/HA, suggesting the potential use of the produced materials as safe biomaterials in bone tissue engineering. (C) 2017 Wiley Periodicals, Inc.