Publication:
Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions

Simple item page
dc.contributor.authorBAKIR, BARKIN
dc.contributor.authorsEker, Beni; Ekici, Bulent; Kurt, Mustafa; Bakur, Barkin
dc.date.accessioned2022-03-14T10:57:29Z
dc.date.available2022-03-14T10:57:29Z
dc.date.issued2014-06-25
dc.description.abstractIn this study, MQL turning performance was compared to dry conditions. The magnesium based material will be formed by applying the orthogonal cutting. The CNC Lathe shall be used for both cutting processes. The experiment used MINITAB 16 software to establish the experiment plan. In this study, workpiece was turned at cutting speeds of 230, 330 and 430 m/min, feed rates of 0.20, 0.35 and 0.50 mm/rev and cutting depth of 1, 2 and 3 mm. Taguchi experimental design method was used for determining the settings of turning parameters. Orthogonal arrays of Taguchi, the signal-to-noise (S/N) ratio, the analysis of variance (ANOVA) were carried out to determine the optimum levels and to analyze the influence of cutting speed, feed rate, cutting depth on surface roughness, temperature and cutting forces during dry and MQL turning.
dc.identifier.doi10.5755/j01.mech.20.3.4702
dc.identifier.eissn2029-6983
dc.identifier.issn1392-1207
dc.identifier.urihttps://hdl.handle.net/11424/245589
dc.identifier.wosWOS:000339303400011
dc.language.isoeng
dc.publisherKAUNAS UNIV TECHNOL
dc.relation.ispartofMECHANIKA
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectDry turning
dc.subjectMQL (Minimum Quantity Lubrication)
dc.subjectMagnesium
dc.subjectSignal to Noise Ratio
dc.subjectANOVA (Analysis of Variance)
dc.subjectDRY
dc.titleSustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions
dc.typearticle
dspace.entity.typePublication
local.avesis.idfd2d44d3-cccc-4e55-bcd4-bd3599460eb4
local.import.packageSS16
local.indexed.atWOS
local.indexed.atSCOPUS
local.journal.numberofpages7
oaire.citation.endPage316
oaire.citation.issue3
oaire.citation.startPage310
oaire.citation.titleMECHANIKA
relation.isAuthorOfPublicationba22703a-9fe6-4a33-91f6-aaa8b498d34d
relation.isAuthorOfPublication.latestForDiscoveryba22703a-9fe6-4a33-91f6-aaa8b498d34d

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Eker et al. - 2014 - Sustainable machining of the magnesium alloy mater.pdf
Size:
4.63 MB
Format:
Adobe Portable Document Format
Download

Collections

Research Outputs