Publication:
Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys

Simple item page
dc.contributor.authorBİLİCİ, MUSTAFA KEMAL
dc.contributor.authorsBozkurt, Yahya; Bilici, Mustafa Kemal
dc.date.accessioned2022-03-12T18:08:18Z
dc.date.available2022-03-12T18:08:18Z
dc.date.issued2013
dc.description.abstractIn this study, the effect of plate positioning on mechanical properties of dissimilar lap joints was investigated by friction stir spot welding (FSSW) process. The determination of the welding parameters plays an important role for the weld strength. For the effective use of the dissimilar aluminum joints, the FSSW must have an adequate strength. The quality of the joint was evaluated by examining the characteristics of the joining efficiency as a result of the lap-shear tensile test. Four process parameters were selected: the tool rotation speed, dwell time, tool plunge depth, and tilt angle. The process parameters were optimized by Taguchi technique based on Taguchi's L9 orthogonal array. The optimum welding process parameters were predicted, and their percentage of contribution was estimated by applying the signal-to-noise ratio and analysis of variance. The experimental results showed that the positioning of the plates played an important role on the strength of the joints. Finally, the results were confirmed by further experiments. Crown Copyright (c) 2013 Published by Elsevier Ltd. All rights reserved.
dc.identifier.doi10.1016/j.matdes.2013.04.074
dc.identifier.eissn1873-4197
dc.identifier.issn0264-1275
dc.identifier.urihttps://hdl.handle.net/11424/231133
dc.identifier.wosWOS:000321696900065
dc.language.isoeng
dc.publisherELSEVIER SCI LTD
dc.relation.ispartofMATERIALS & DESIGN
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectSTIR SPOT WELDS
dc.subjectFRICTION
dc.subjectRESISTANCE
dc.subjectSTRENGTH
dc.subjectTOOL
dc.titleApplication of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys
dc.typearticle
dspace.entity.typePublication
local.avesis.ide08f9175-7246-4a3d-9cc2-25acd212d73a
local.import.packageSS17
local.indexed.atWOS
local.indexed.atSCOPUS
local.journal.numberofpages9
oaire.citation.endPage521
oaire.citation.startPage513
oaire.citation.titleMATERIALS & DESIGN
oaire.citation.volume51
relation.isAuthorOfPublication73d3ca90-c748-4e8d-b88d-7c005518b798
relation.isAuthorOfPublication.latestForDiscovery73d3ca90-c748-4e8d-b88d-7c005518b798

Files

Collections

Research Outputs