Publication:
A Hydrophobic antireflective and antidust coating with $\text{SiO}_2$ and $\text{TiO}_2$ nanoparticles using a new 3-D printing method for photovoltaic panels

Simple item page
dc.contributor.authorEKREN, NAZMİ
dc.contributor.authorSAĞLAM, ŞAFAK
dc.contributor.authorsEkren N., Sarkin A. S., Sağlam Ş.
dc.date.accessioned2023-06-23T07:15:43Z
dc.date.available2023-06-23T07:15:43Z
dc.date.issued2022-07-01
dc.description.abstractThe main outdoor factors that reduce the efficiency of the photovoltaic (PV) panel are the reflection and refraction of light, dirt, dust, and organic waste accumulating on the panel surface. In this article, an antireflection, self-cleaning coating was applied on the PV panel cover glass with a new method. With the coating, the surface has been given a hydrophobic feature. As a coating method, a 3-D printer has not been seen in the literature and used as a new method. The electrospinning method has also been tried as an alternative method. Solutions in different combinations were developed using polylactic acid or polymethylmethacrylate polymer, chloroform ($\text{CHCl}_3$) as a solvent, and silicon dioxide ($\text{SiO}_2$) and titanium dioxide ($\text{TiO}_2$) nanoparticles as primary materials in a modified 3-D printer for bioprinting. Five PV panels were obtained by applying different 3-D parameters from three solutions, which have the best results. Coating thicknesses are in the range of 3.12-8.47 mu m. Coated and uncoated PV panels were tested in outdoor conditions for ten-day periods. The power outputs of the PV panels were measured, and their ten-day average efficiency was presented. According to the results, the highest efficiency increase is 8.7%. The highest light transmittance is 88.2% at 550 nm. In addition, hydrophobic properties were observed on all surfaces and the water contact angle was measured as 96.18 degrees.
dc.identifier.citationEkren N., Sarkin A. S., Sağlam Ş., "A Hydrophobic Antireflective and Antidust Coating With $\text{SiO}_2$ and $\text{TiO}_2$ Nanoparticles Using a New 3-D Printing Method for Photovoltaic Panels", IEEE JOURNAL OF PHOTOVOLTAICS, cilt.12, sa.4, ss.1014-1026, 2022
dc.identifier.doi10.1109/jphotov.2022.3177229
dc.identifier.endpage1026
dc.identifier.issn2156-3381
dc.identifier.issue4
dc.identifier.startpage1014
dc.identifier.urihttps://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9789282
dc.identifier.urihttps://hdl.handle.net/11424/290528
dc.identifier.volume12
dc.language.isoeng
dc.relation.ispartofIEEE JOURNAL OF PHOTOVOLTAICS
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectTarımsal Bilimler
dc.subjectZiraat
dc.subjectTarım Makineleri
dc.subjectTarımda Enerji
dc.subjectBiyoyakıt Teknolojisi
dc.subjectFizik
dc.subjectTemel Bilimler
dc.subjectMühendislik ve Teknoloji
dc.subjectAgricultural Sciences
dc.subjectAgriculture
dc.subjectFarm Machinery
dc.subjectEnergy in Agriculture
dc.subjectBiofuels Technology
dc.subjectPhysics
dc.subjectNatural Sciences
dc.subjectEngineering and Technology
dc.subjectENERJİ VE YAKITLAR
dc.subjectMühendislik
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMALZEME BİLİMİ, ÇOKDİSİPLİNLİ
dc.subjectMalzeme Bilimi
dc.subjectFİZİK, UYGULAMALI
dc.subjectTemel Bilimler (SCI)
dc.subjectENERGY & FUELS
dc.subjectENGINEERING
dc.subjectEngineering, Computing & Technology (ENG)
dc.subjectMATERIALS SCIENCE, MULTIDISCIPLINARY
dc.subjectMATERIALS SCIENCE
dc.subjectPHYSICS, APPLIED
dc.subjectPHYSICS
dc.subjectNatural Sciences (SCI)
dc.subjectİstatistiksel ve Doğrusal Olmayan Fizik
dc.subjectMetaller ve Alaşımlar
dc.subjectMalzeme Kimyası
dc.subjectGenel Malzeme Bilimi
dc.subjectGenel Mühendislik
dc.subjectMühendislik (çeşitli)
dc.subjectYenilenebilir Enerji, Sürdürülebilirlik ve Çevre
dc.subjectYakıt Teknolojisi
dc.subjectEnerji Mühendisliği ve Güç Teknolojisi
dc.subjectEnerji (çeşitli)
dc.subjectGenel Enerji
dc.subjectFizik Bilimleri
dc.subjectStatistical and Nonlinear Physics
dc.subjectMetals and Alloys
dc.subjectMaterials Chemistry
dc.subjectGeneral Materials Science
dc.subjectGeneral Engineering
dc.subjectEngineering (miscellaneous)
dc.subjectRenewable Energy, Sustainability and the Environment
dc.subjectFuel Technology
dc.subjectEnergy Engineering and Power Technology
dc.subjectEnergy (miscellaneous)
dc.subjectGeneral Energy
dc.subjectPhysical Sciences
dc.subjectCoatings
dc.subjectGlass
dc.subjectPrinters
dc.subjectSurface treatment
dc.subjectProgrammable logic arrays
dc.subjectPrinting
dc.subjectSolvents
dc.subject3-D printing
dc.subjectantireflection
dc.subjecthydrophobic
dc.subjectnanoparticle
dc.subjectphotovoltaic (PV)
dc.subjectself-cleaning
dc.subjectSOL-GEL
dc.subjectTRANSPARENT
dc.subjectFABRICATION
dc.subjectPOLYMERS
dc.subjectSURFACES
dc.titleA Hydrophobic antireflective and antidust coating with $\text{SiO}_2$ and $\text{TiO}_2$ nanoparticles using a new 3-D printing method for photovoltaic panels
dc.typearticle
dspace.entity.typePublication
local.avesis.id36651b23-e795-44ec-9904-7a2f98c91119
local.indexed.atWOS
local.indexed.atSCOPUS
relation.isAuthorOfPublicationbf8fa87c-9f12-4134-a6e3-274f1ec50ed9
relation.isAuthorOfPublication626969d4-2bdf-49c1-a214-cc9bf82c5b67
relation.isAuthorOfPublication.latestForDiscoverybf8fa87c-9f12-4134-a6e3-274f1ec50ed9

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
3.pdf
Size:
6.5 MB
Format:
Adobe Portable Document Format
Download

Collections

Research Outputs