Publication:
Mechanical, electrical and tribological properties of graphite filled polyamide-6 composite materials

Simple item page
dc.contributor.authorESMER, KADİR
dc.contributor.authorsUnal, Huseyin; Esmer, Kadir; Mimaroglu, Abdullah
dc.date.accessioned2022-03-12T18:09:19Z
dc.date.available2022-03-12T18:09:19Z
dc.date.issued2013
dc.description.abstractIn this study, the influence of adding graphite filler, on the mechanical, electrical and tribological properties of nylon-6 composites, is studied. Graphite fillers with different percentages, varying between 5 and 15 wt% were added to nylon-6 polymer material. Nylon-6 composite samples were prepared by the injection molding process. Tensile, impact, electrical and tribological tests were carried out and the dielectric permittivity tangent loss factor, tensile strength, modulus of elasticity, elongation at break, impact strength, specific wear rate and coefficient of friction properties were obtained. The results showed that the tensile strength, elongation at break, impact strength, and specific wear rate of nylon-6 composites, decrease with the increase in graphite filler weight ratio, while the modulus of elasticity, hardness, real part of dielectric permittivity, imaginary part of dielectric permittivity and dielectric loss, increase with increase in the filler weight ratio. Furthermore, it is observed that a rise in the relaxation time of ionic polarization is proportional to the increase in the amount of graphite in the medium and the dielectric conductivity and loss decrease proportionally after approximately 10 KHz. Finally, the maximum improvement in properties, in total, is recorded following the addition of 5 to 10 wt% graphite filler.
dc.identifier.doi10.1515/polyeng-2013-0043
dc.identifier.eissn2191-0340
dc.identifier.issn0334-6447
dc.identifier.urihttps://hdl.handle.net/11424/231266
dc.identifier.wosWOS:000322969200008
dc.language.isoeng
dc.publisherWALTER DE GRUYTER GMBH
dc.relation.ispartofJOURNAL OF POLYMER ENGINEERING
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectcomposite
dc.subjectdielectric properties
dc.subjectgraphite
dc.subjectmechanical
dc.subjectCARBON FILLERS
dc.subjectBEHAVIOR
dc.subjectCONDUCTIVITY
dc.subjectPERFORMANCE
dc.subjectPERCOLATION
dc.subjectFRICTION
dc.subjectNYLON
dc.subjectFIBER
dc.subjectDRY
dc.titleMechanical, electrical and tribological properties of graphite filled polyamide-6 composite materials
dc.typearticle
dspace.entity.typePublication
local.avesis.idcbe13eaf-04c5-49e6-94cd-cb98ae62eb66
local.import.packageSS17
local.indexed.atWOS
local.indexed.atSCOPUS
local.journal.numberofpages5
oaire.citation.endPage355
oaire.citation.issue4
oaire.citation.startPage351
oaire.citation.titleJOURNAL OF POLYMER ENGINEERING
oaire.citation.volume33
relation.isAuthorOfPublicationd99fd053-3197-4952-a179-27dfb16cbe0d
relation.isAuthorOfPublication.latestForDiscoveryd99fd053-3197-4952-a179-27dfb16cbe0d

Files

Collections

Research Outputs