Publication:
The effect of pre-deposited titanium-based PVD metallic thin films on the nitrogen diffusion efficiency and wear behaviour of nitrided Ti alloys

Simple item page
dc.contributor.authorYUMUŞAK, GÖRKEM
dc.contributor.authorsYumusak, G.; Leyland, A.; Matthews, A.
dc.date.accessioned2022-03-14T09:18:55Z
dc.date.available2022-03-14T09:18:55Z
dc.date.issued2020-07
dc.description.abstractLow-temperature Triode Plasma Nitriding (TPN) has been reported to increase the load-bearing capacity of titanium alloys without compromising either core strength or fatigue resistance. It is known also that the effective adhesion between PVD hard coatings and titanium alloy substrates can be improved significantly following substrate diffusion pre-treatment. In TPN treatment the diffusion of the nitrogen can be achieved more efficiently (than conventional nitriding techniques) at a comparatively low substrate temperature and after relatively short treatment times. Moreover, there is evidence to suggest that the effectiveness of the triode-plasma diffusion treatment can be further increased by depositing a suitable thin PVD metallic layer on to the titanium alloy substrate before plasma nitriding treatment, to beneficially modify the diffusion kinetics. In this paper, both hcp-alpha and bcc-beta titanium coatings (the latter stabilised by the addition of Nb) are applied to (alpha + beta) Ti-6Al-4V and (beta) Ti-4Al-10V-22Mo substrate materials; the effects of a Ti and beta Ti-Nb PVD pre-coating on the diffusion treatment efficiency (and nitride phase development) and the wear behaviour of each of the Ti alloy substrates after TPN treatment at 700 degrees C is evaluated.
dc.identifier.doi10.1016/j.surfcoat.2020.125545
dc.identifier.issn0257-8972
dc.identifier.urihttps://hdl.handle.net/11424/242952
dc.identifier.wosWOS:000542100500001
dc.language.isoeng
dc.publisherELSEVIER SCIENCE SA
dc.relation.ispartofSURFACE & COATINGS TECHNOLOGY
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectTitanium-niobium coatings
dc.subjectMagnetron sputtering
dc.subjectTriode plasma nitriding
dc.subjectMicro-abrasion test
dc.subjectTI-6AL-4V ALLOY
dc.subjectPLASMA
dc.subjectCOATINGS
dc.subjectMICROSTRUCTURE
dc.subjectPERFORMANCE
dc.subjectMORPHOLOGY
dc.titleThe effect of pre-deposited titanium-based PVD metallic thin films on the nitrogen diffusion efficiency and wear behaviour of nitrided Ti alloys
dc.typearticle
dspace.entity.typePublication
local.avesis.id86292cf8-bba7-493c-9def-ba913f805507
local.import.packageSS16
local.indexed.atWOS
local.indexed.atSCOPUS
local.journal.articlenumber125545
local.journal.numberofpages13
local.journal.quartileQ1
oaire.citation.titleSURFACE & COATINGS TECHNOLOGY
oaire.citation.volume394
relation.isAuthorOfPublicationd3895ae9-4dad-4ca9-ad11-40b664bd060e
relation.isAuthorOfPublication.latestForDiscoveryd3895ae9-4dad-4ca9-ad11-40b664bd060e

Files

Collections

Research Outputs