Person: İNAN, AHMET TALAT
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
İNAN
First Name
AHMET TALAT
Name
6 results
Search Results
Now showing 1 - 6 of 6
Publication Metadata only Design and fabrication of electrospun polycaprolactone/chitosan scaffolds for ligament regeneration(PERGAMON-ELSEVIER SCIENCE LTD, 2021) İNAN, AHMET TALAT; Saatcioglu, Elif; Ulag, Songul; Sahin, Ali; Yilmaz, Betul Karademir; Ekren, Nazmi; Inan, Ahmet Talat; Palaci, Yuksel; Ustundag, Cem Bulent; Gunduz, OguzhanTendon and ligament impairments are among the most familiar injuries of the knee with acute or chronic pain conditions. The defects of anterior cruciate ligament (ACL) stay a known clinical problem. In the present study, the electrospinning method was used to fabricate 10wt.%PCL/(1, 3, 5)wt.%Chitosan (CS) appropriate and biocompatible scaffolds with a similar connective ligament geometry and structure. 10wt.%PCL/3wt.%CS demonstrated higher tensile strength value (0.58854 MPa) than other scaffolds in the tensile test. Moreover, 10wt.%PCL/3wt.%CS scaffolds had high mesenchymal stem cells (MSCs) viability value for all incubation periods. Swelling and degradation behaviours of the ligament-like scaffolds were examined in vitro for 15 days. Results reported that the highest swelling ratio was observed with CS addition for 10wt.%PCL/5wt.%CS scaffolds which value nearly reached to the 270% ratio. Scanning electron microscope proved the geometry of the scaffolds, which were suitable for ligament-like tissue. Attachment of MSCs on the scaffolds proved the network-like structure of the cells on the scaffolds.Publication Metadata only Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen scaffolds for hard tissue engineering(SPRINGER, 2019) İNAN, AHMET TALAT; Aydogdu, Mehmet O.; Mutlu, Bilcen; Kurt, Mustafa; Inan, Ahmet T.; Kuruca, Serap E.; Erdemir, Goekce; Sahin, Yesim M.; Ekren, Nazmi; Oktar, Faik N.; Gunduz, Oguzhan3D bioprinting provides an innovative strategy to fabricate a new composite scaffold material consisted in a porous and rough structure with using polycaprolactone (PCL), beta-tricalcium phosphate (beta-TCP), and collagen as a building block for tissue engineering. We investigated the optimization of the scaffold properties based on the beta-TCP concentration using 3D bioprinting method. Computer-aided drawing was applied in order to digitally design the scaffolds while instead of solid filaments, materials were prepared as a blend solution and controlled evaporation of the solvent during the bioprinting was enabled the proper solidification of the scaffolds, and they were successfully produced with well-defined porous structure. This work demonstrated the feasibility of complex PCL/beta-TCP/collagen scaffolds as an alternative in the 3D bioprinting engineering to the fabrication of porous scaffolds for tissue engineering.Publication Metadata only Fabrication and characterization of hazelnut shellpowder with reinforced polymer compositenanofibers(2018-09-14) KARTAL, İLYAS; OKTAR, FAİK NÜZHET; EKREN, NAZMİ; İNAN, AHMET TALAT; GÜNDÜZ, OĞUZHAN; CESUR, SÜMEYYE; Şengör İ., Cesur S., Kartal İ., Oktar F. N., Ekren N., İnan A. T., Gündüz O.Publication Metadata only Nanofibrous wound dressing material by electrospinning method(TAYLOR & FRANCIS AS, 2019) İNAN, AHMET TALAT; Yeniay, Eda; Ocal, Leyla; Altun, Esra; Giray, Betul; Oktar, Faik Nuzhet; Inan, Ahmet Talat; Ekren, Nazmi; Kilic, Osman; Gunduz, OguzhanWound dressings are very useful materials for accelerating the wound healing process. In this study, nanofibrous wound dressings were produced from blending solution of Poly-lactic acid(PLA)/Chitosan(C)/Starch(S)/Zinc oxide(Z) by electrospinning method. Morphology, chemical interaction, mechanical, water uptake and weight loss tests were performed on each samples. Moreover, the biocompatibility of primary dermal fibroblast (ATCC, PCS-201-012) on prepared wound dressings was investigated with MTT assays in vitro, and the samples were found suitable for cell viability and proliferation. These results suggest that produced nanofibrous wound dressings can be promising candidate for wound dressing applications. [GRAPHICS] .Publication Metadata only Magnetic Core Shell Structures: From 0D to 1D Assembling(BENTHAM SCIENCE PUBL LTD, 2015) İNAN, AHMET TALAT; Ficai, Denisa; Ficai, Anton; Dinu, Elena; Oprea, Ovidiu; Sonmez, Maria; Keler, Memduh Kagan; Sahin, Yesim Muge; Ekren, Nazmi; Inan, Ahmet Talat; Daglilar, Sibel; Gunduz, OguzhanMaterial research and development studies are focused on different techniques of bringing out nanomaterials with desired characteristics and properties. From the point of view of materials development, nowadays scientists are strongly focused on obtaining materials with predefined characteristics and properties. The morphology control seems to be a determinant factor and increasing attention is devoted to this aspect. At this moment it is possible to engineer the material's features by using different methods and materials combination for both medical and industrial applications. In the applications of chemistry and synthesis, biology, mechanics, optics solar cells and microelectronics tailoring the adjustable parameters of stoichiometry, chemical structure, shape and segregation are evaluated and opens new fields. Because of the magnetic features of nanoparticles and durable particle size, less than 100 nm, this study is aiming to describe their uses in practical applications. That's why the whole hydrodynamic magnetic core shell topic will be reviewed on this paper. Additionally, the properties acting in general sight in solid-state physics are utilized for material selection and for defining issue connecting the core, shell structure and their producing properties. Here, in the study of core/shell nanoparticle various physical and chemical synthesis routes and the effect of electrospun method are briefly discussed. Starting from a real void of the scientific literature, the existent data related to the 1D magnetic electrospun materials are reviewed. The perspectives in the medical, environmental or energetic sector is great and bring some real advantages related to the 0D core@shell structures because both mechanical and biological properties are dependent on the morphology of the materials.Publication Metadata only 3D bio-printing of levan/polycaprolactone/gelatin blends for bone tissue engineering: Characterization of the cellular behavior(PERGAMON-ELSEVIER SCIENCE LTD, 2019) İNAN, AHMET TALAT; Duymaz, Busra Tugce; Erdiler, Fatma Betul; Alan, Tugba; Aydogdu, Mehmet Onur; Inan, Ahmet Talat; Ekren, Nazmi; Uzun, Muhammet; Sahin, Yesim Muge; Bulus, Erdi; Oktar, Faik Nuzhet; Selvi, Sinem Selvin; ToksoyOner, Ebru; Kilic, Osman; Bostan, Muge Sennaroglu; Eroglu, Mehmet Sayip; Gunduz, OguzhanPoly(epsilon-caprolactone) (PCL), gelatin (GT) and different concentrations of low molecular weight Halomonas levan (HLh) were combined and examined to develop physical networks serving as tissue scaffolds to promote cell adhesion for biocompatibility. Three-dimensional bioprinting technique (3D bioprinting) was employed during manufacturing the test samples and their comprehensive characterization was performed to investigate the physicochemical properties and biocompatibility. Physical properties of the printing materials such as viscosity, surface tension, and density were measured to determine optimal parameters for 3D bioprinting. The scanning electron microscope (SEM) was used to observe the morphological structure of scaffolds. Fourier-Transform Infrared Spectroscopy (FT-IR) and differential scanning calorimetry (DSC) were used to identify the interactions between the components. In-vitro cell culture assays using standard human osteoblast (Hob) cells showed increased biocompatibility of the printing materials with increasing HLh content. Thus, the formulations including the HLh are expected to be a good candidate for the production of 3D printed materials.