Person: OKTAR, FAİK NÜZHET
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
OKTAR
First Name
FAİK NÜZHET
Name
18 results
Search Results
Now showing 1 - 10 of 18
Publication Metadata only Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application(SPRINGER, 2020) BİLĞİÇ ALKAYA, DİLEK; Cesur, Sumeyye; Oktar, Faik Nuzhet; Ekren, Nazmi; Kilic, Osman; Alkaya, Dilek Bilgic; Seyhan, Serap Ayaz; Ege, Zeynep Ruya; Lin, Chi-Chang; Erdem, Serap; Erdemir, Gokce; Gunduz, OguzhanBone tissue engineering has begun to draw attention in recent years. The interactive combination of biomaterials and cells is part of bone tissue engineering. Sodium alginate (SA) is a biologically compatible, degradable, non-toxic natural polymer accepted by the human body and is widely used in the field of tissue engineering. Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. Hydroxyapatite (HA) and tricalcium phosphate (TCP) derived from natural sources such as marine species and bovine bone are biocompatible and non-toxic biomaterials which are used to reconstruct many parts of the skeleton. In this study, PLA, SA with different compositions, and nanofibers obtained by adding orange spiny oyster shell powders (Spondylus barbatus) to them by using electrospining technique. Cell culture study, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and physical analysis such as density, electrical conductivity, surface tension, viscosity measurement, and tensile strength measurement tests were carried out after the production process. Produced nanofibers showed smooth and beadless surface. The average diameters and distributions decreased with the addition of optimum PLA and TCP amount. The tensile strength of nanofibers was enhanced with the additional SA and TCP. The produced nanofibers are compatible with human bone tissue, which are not cytotoxic, and in addition, a high cell efficiency of SaOS-2 cells on the nanofibers was observed with SEM images.Publication Metadata only Fabrication and characterization of pla/sa/ha composite nanofiber by electrospinning for bone tissue engineering applications(2018-07-18) CESUR, SÜMEYYE; EKREN, NAZMİ; KILIÇ, OSMAN; OKTAR, FAİK NÜZHET; BİLĞİÇ ALKAYA, DİLEK; AYAZ SEYHAN, SERAP; GÜNDÜZ, OĞUZHAN; Cesur S., Ekren N., Kılıç O., Oktar F. N., Bilğiç Alkaya D., Ayaz Seyhan S., Ege Z. R., Gündüz O.Publication Metadata only Production and Characterization of Antimicrobial Electrospun Nanofibers Containing Polyurethane, Zirconium Oxide and Zeolite(SPRINGER, 2018) OKTAR, FAİK NÜZHET; Aydogdu, Mehmet Onur; Oprea, Alexandra Elena; Trusca, Roxana; Surdu, Adrian Vasile; Ficai, Anton; Holban, Alina Maria; Iordache, Florin; Paduraru, Andrei Viorel; Filip, Diana Georgiana; Altun, Esra; Ekren, Nazmi; Oktar, Faik Nuzhet; Gunduz, OguzhanIn this study, electrospinning technique has been utilized to prepare composite nanofiber mats of polyurethane (PU)/zirconium dioxide (ZrO2) and PU/zeolite, consisted by antimicrobial properties. Tensile strength measurement test was performed for the mechanical analysis of the nanofibers. Scanning electron microscopy (SEM) were performed for displaying the morphological features of the fiber structure. XRD tests were performed for revealing the chemical structure. Antimicrobial tests were also performed to display antimicrobial effects of the produced materials. In vitro test was also performed to determine cytotoxicity and biocompatibility. The present PU/ZrO2 and PU/zeolite composite nanofibers resulted with improved mechanical properties and good antimicrobial properties against either their pure forms or other studies. Cell proliferation and viability also increased significantly with increase in zeolite and ZrO2 ratio. It is concluded that this composition provides a novel alternative as an antimicrobial material which can be suitable as a wound dressing or a coating material for various healthcare engineering applications.Publication Metadata only Effect of yttria-doping on mechanical properties of bovine hydroxyapatite (BHA)(SAGE PUBLICATIONS LTD, 2008) OKTAR, FAİK NÜZHET; Gunduz, O.; Daglilar, S.; Salman, S.; Ekren, N.; Agathopoulos, S.; Oktar, F. N.Sintered bodies of hydroxyapatite, derived from calcinated bovine bone (BHA) and doped with 0.5 and 1wt% Y2O3, were prepared. Measurements of density, compression strength, and microhardness, along with scanning electron microscopy (SEM) and X-ray diffraction (XRD) were carried out. The experimental results showed that BHA doping with yttria favors formation of glassy phase, which advances sintering and results in a dense and reinforced BHA matrix. The best mechanical properties were achieved after sintering at 1200 degrees C for compressive strength (82 MPa) and 1300 degrees C for microhardness (672 HV). These results are better than pure BHA or composites of hydroxyapatite with Y2O3-stablized zirconia, qualifying yttria (as dopant of BHA) for further in vitro and in vivo experimentation.Publication Metadata only Production of the biomimetic small diameter blood vessels for cardiovascular tissue engineering(TAYLOR & FRANCIS AS, 2019) TOKSOY ÖNER, EBRU; Aydogdu, Mehmet Onur; Chou, Joshua; Altun, Esra; Ekren, Nazmi; Cakmak, Selami; Eroglu, Mehmet; Osman, Asila A.; Kutlu, Ozlem; Oner, Ebru Toksoy; Avsar, Gulben; Oktar, Faik Nuzhet; Yilmaz, Ismail; Gunduz, OguzhanA novel biomimetic vascular graft scaffolds were produced by electrospinning method with the most superior characteristics to be a proper biomimetic small diameter blood vessel using Polycaprolactone(PCL), Ethyl Cellulose(EC) and Collagen Type-1 were used to create the most convenient synergy of a natural and synthetic polymer to achieve similarity to native small diameter blood vessels. Scanning Electron Microscopy(SEM), Fourier Transform Infrared Spectroscopy(FTIR), Differential Scanning Calorimetry Analysis(DSC), tensile measurement tests, and in-vitro and in-vivo applications were performed. Results indicated significant properties such as having 39.33 nm minimum, 104.98 nm average fiber diameter, 3.2 MPa young modulus and 135% relative cell viability. [GRAPHICS] .Publication Metadata only Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen scaffolds for hard tissue engineering(SPRINGER, 2019) İNAN, AHMET TALAT; Aydogdu, Mehmet O.; Mutlu, Bilcen; Kurt, Mustafa; Inan, Ahmet T.; Kuruca, Serap E.; Erdemir, Goekce; Sahin, Yesim M.; Ekren, Nazmi; Oktar, Faik N.; Gunduz, Oguzhan3D bioprinting provides an innovative strategy to fabricate a new composite scaffold material consisted in a porous and rough structure with using polycaprolactone (PCL), beta-tricalcium phosphate (beta-TCP), and collagen as a building block for tissue engineering. We investigated the optimization of the scaffold properties based on the beta-TCP concentration using 3D bioprinting method. Computer-aided drawing was applied in order to digitally design the scaffolds while instead of solid filaments, materials were prepared as a blend solution and controlled evaporation of the solvent during the bioprinting was enabled the proper solidification of the scaffolds, and they were successfully produced with well-defined porous structure. This work demonstrated the feasibility of complex PCL/beta-TCP/collagen scaffolds as an alternative in the 3D bioprinting engineering to the fabrication of porous scaffolds for tissue engineering.Publication Metadata only Investigation of 3D-Printed Polycaprolactone-/Polyvinylpyrrolidone-Based Constructs(SAGE PUBLICATIONS INC) ŞAHİN, ALİ; Izgordu, Muhammet Sefa; Uzgur, Evren Isa; Ulag, Songul; Sahin, Ali; Yilmaz, Betul Karademir; Kilic, Beyhan; Ekren, Nazmi; Oktar, Faik Nuzhet; Gunduz, OguzhanThe aim of this study is to evaluate the mechanical and biological performance of cartilage-like constructs produced by 3D printing. During the investigation, poly(epsilon-caprolactone) (PCL) and polyvinylpyrrolidone (PVP) were used as a matrix polymer and low-molecular-weight chitosan (CS), hyaluronic acid (HA), and alginic acid sodium salt (SA) were integrated separately with the polymer matrix to fabricate the constructs. Thermal, mechanical, morphology, and chemical properties and swelling, degradation, and biocompatibility behaviors were evaluated in detail. With the addition of 3 fillers, the melting temperature of the matrix increased with the addition of fillers, and PCL/3wt.%PVP/1wt.%HA had the highest melting temperature value. Mechanical characterization results demonstrated that the printed PCL/3wt.%PVP/1wt.%CS displayed the highest compressive strength of around 9.51 MPa. The compressive strength difference between the PCL/3wt.%PVP and PCL/3wt.%PVP/1wt.%CS was 5.38 MPa. Biocompatibility properties of the constructs were tested by mitochondrial dehydrogenase activity, and in vitro studies showed that the PCL/3wt.%PVP/1wt.%HA composite construct had more cell viability than the other constructs by making use of the mesenchymal stem cell line.Publication Metadata only Fabrication and characterization of hazelnut shellpowder with reinforced polymer compositenanofibers(2018-09-14) KARTAL, İLYAS; OKTAR, FAİK NÜZHET; EKREN, NAZMİ; İNAN, AHMET TALAT; GÜNDÜZ, OĞUZHAN; CESUR, SÜMEYYE; Şengör İ., Cesur S., Kartal İ., Oktar F. N., Ekren N., İnan A. T., Gündüz O.Publication Metadata only Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application(Springer, 2020) ŞAHİN, ALİ; Ilhan E., Ulag S., Sahin A., Ekren N., Kilic O., Oktar F.N., Gunduz O.In recent years, scaffolds produced in 3D printing technology have become more widespread tool due to providing more advantages than traditional methods in tissue engineering applications. In this research, it was aimed to produce patches for the treatment of tympanic membrane perforations which caused significant hearing loss by using 3D printing method. Polylactic acid (PLA) scaffolds with Chitosan (CS) added in various ratios were prepared for artificial eardrum patches. Different amounts of CS added to PLA to obtain more biocompatible scaffolds. The created patches were designed by mimicking the thickness of the natural tympanic membrane thanks to the precision provided by the 3D printed method. The produced scaffolds were analyzed separately for physical, chemical, morphological, mechanical and biocompatibility properties. Human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) were used for cell culture study to analyze the biocompatibility properties. 15 wt% PLA was chosen as the control group. Scaffold containing 3 wt% CS demonstrated significantly superior and favorable features in printing quality. The study continued with these two scaffolds (15PLA and 15PLA/3CS). This study showed that PLA and PLA/CS 3D printed scaffolds are a potential application for repairing tympanic membrane perforation. © Springer Nature Switzerland AG 2020.Publication Metadata only Novel electrospun polycaprolactone/graphene oxide/Fe3O4 nanocomposites for biomedical applications(ELSEVIER SCIENCE BV, 2018) OKTAR, FAİK NÜZHET; Aydogdu, Mehmet Onur; Ekren, Nazmi; Suleymanoglu, Mediha; Erdem-Kuruca, Serap; Lin, Chi-Chang; Bulbul, Ertugrul; Erdol, Meltem Nur; Oktar, Faik Nuzhet; Terzi, Umit Kemalettin; Kilic, Osman; Gunduz, OguzhanIn this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe3O4) nanocomposite fibers as biocompatible scaffolds for biomedical applications. Products were analyzed by scanning electron microscopy (SEM) for morphological analysis of the electrospun nanocomposites and Fourier Transform Infrared Spectroscopy (FTIR) was used to determine functional groups of the PCL, GO, and Fe3O4 materials in the electrospun nanocomposites. For physical properties, viscosity, density, permittivity, dielectric loss and liquid and solid state alternating current conductivity, measurements were done for each nanocomposite fibers. Effects of concentration percentage of GO on permittivity, dielectric loss and AC conductivity have been analyzed by using measured and calculated data. Trend lines have been drawn for permittivity, dielectric loss and conductivity via concentration percentage of GO. The relation between ac conductivity and frequency have been studied for each concentration percentage of GO and interpretations have been done by using the obtained results.