Publication:
Plasma-sprayed human bone-derived hydroxyapatite coatings: effective and reliable

dc.contributor.authorsGoller, G; Oktar, FN; Ozyegin, LS; Kayali, ES; Demirkesen, E
dc.date.accessioned2022-03-12T17:16:59Z
dc.date.accessioned2026-01-11T13:37:47Z
dc.date.available2022-03-12T17:16:59Z
dc.date.issued2004
dc.description.abstractHuman bone-derived hydroxyapatite (HHA) was used as plasma-spraying powder in this study. The starting powder was derived with the calcination method as described in recent literature. There have been very few researchers who were seriously interested in calcined HHA as a grafting material. Instead, demineralized HHA (from other humans) was usually preferred among surgeons. This brings some possible danger of transmission of infectious diseases like hepatitis B and C, human immunodeficiency virus (HIV), and almost incurable prion diseases like Creutzfeldt-Jakob disease (CJD) and bovine spongiform encephalopathy (BSE). Due to very high temperature application (850 degreesC), calcined HA seems to be safe and promising as an alternative product to other HA materials in the biomaterial market. As it is known, HA is very weak at load-bearing applications. To overcome this weakness, it is suggested to use it as a coating on metallic substrates. The HA plasma spraying process is a well-known process for such durable coatings. In addition, in order to gain higher strength, it is recommended to use a very thin bond-coating layer to prevent the mismatch of the thermal coefficients between metal and ceramic. Bond coatings are used very widely in industrial applications. Some biomedical bond-coating research has been conducted, but the reports are not yet commercialized. In this study, tensile strength, SEM and X-ray diffraction studies were performed. Bonding strength was found to be 6.91 MPa for nonbond-coated and 13.15 MPa for bond-coated HHA coatings. These results indicate that the application of bond coating with HHA had strengthened the structure of this material. The X-ray diffraction analysis showed a relatively high crystalline phase. SEM pictures indicate very good adhesion of the bond coating on the metal and on the main coating. The production of HHA with the calcination method is economic, and the resulting material (in combination with plasma spraying) can be used for bone grafting purposes. (C) 2004 Elsevier B.V. All rights reserved.
dc.identifier.doi10.1016/j.matlet.2004.03.032
dc.identifier.issn0167-577X
dc.identifier.urihttps://hdl.handle.net/11424/227741
dc.identifier.wosWOS:000223015700009
dc.language.isoeng
dc.publisherELSEVIER SCIENCE BV
dc.relation.ispartofMATERIALS LETTERS
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjecthuman-derived hydroxyapatite
dc.subjectcalcination
dc.subjectplasma spraying
dc.subjectbond coating
dc.subjectbone grafts
dc.subjecttransmitting infectious diseases
dc.subjecteconomic
dc.subjectMECHANICAL-PROPERTIES
dc.subjectRECONSTRUCTION
dc.subjectCOMPOSITES
dc.subjectDENTIN
dc.titlePlasma-sprayed human bone-derived hydroxyapatite coatings: effective and reliable
dc.typearticle
dspace.entity.typePublication
oaire.citation.endPage2604
oaire.citation.issue21
oaire.citation.startPage2599
oaire.citation.titleMATERIALS LETTERS
oaire.citation.volume58

Files